Modal Analysis of a Sensor-Loaded 3D-Printed Cantilever Beam Analytical Formulation, Finite Element Modeling, and Experimental Validation
Journal of Intelligent Decision Making and Information Science · 09.09.2026 · 3 (18s) · 2686-2712
DOI: 10.17762/jidmis.v3.6029 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Intelligent Decision Making and Information Science, online erschienen am 09.09.2026. Verfasst von Vidyanand S Jakukore. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study investigates the vibration characteristics of a 3D-printed cantilever beam, analyzing conditions accelerometer sensor kept on Fixture accelerometer sensor kept on the tip. Natural frequencies and mode shapes are determined using Euler–Bernoulli beam theory and transcendental frequency equations, alongside finite element modeling with COMSOL Multiphysics and experimental modal testing via harmonic excitation and FFT analysis. Two experimental configurations are examined: the sensor at the fixed end and at the free end, highlighting the impact of mass loading. Results show a significant reduction in the fundamental natural frequency with the sensor at the tip, while higher modes are less affected. When the accelerometer sensor was placed on the fixture, analytical results exceeded both experimental and COMSOL values by approximately 8% for the fundamental mode. With the sensor on the beam tip, the experimental frequency was 19.53 Hz, closely matching the COMSOL result of 19.61 Hz (error: 0.41%), while the analytical prediction was 17.34 Hz (deviation: 11.21% from experiment). These findings demonstrate strong agreement between FEA and experiments, confirming that transcendental formulations and numerical approaches are effective for analyzing the vibrations of lightweight 3D-printed beams.
Zitieren
APA
Jakukore, V. S. (2026). Modal Analysis of a Sensor-Loaded 3D-Printed Cantilever Beam Analytical Formulation, Finite Element Modeling, and Experimental Validation. Journal of Intelligent Decision Making and Information Science, 3(18s), 2686-2712. https://doi.org/10.17762/jidmis.v3.6029
Vancouver
Jakukore VS. Modal Analysis of a Sensor-Loaded 3D-Printed Cantilever Beam Analytical Formulation, Finite Element Modeling, and Experimental Validation. Journal of Intelligent Decision Making and Information Science. 2026;3(18s):2686-2712. doi:10.17762/jidmis.v3.6029
BibTeX
@article{Jakukore2026,
author = {Jakukore, Vidyanand S},
title = {Modal Analysis of a Sensor-Loaded 3D-Printed Cantilever Beam Analytical Formulation, Finite Element Modeling, and Experimental Validation},
journal = {Journal of Intelligent Decision Making and Information Science},
year = {2026},
volume = {3},
number = {18s},
pages = {2686--2712},
doi = {10.17762/jidmis.v3.6029}
}
EUVIMED