Optimization of Loading Path for Hydroforming of Asymmetric Curved Tubes Using AMGA
Materials · 15.07.2026 · 19 (14) · 3046
DOI: 10.3390/ma19143046 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 15.07.2026. Verfasst von Zaixiang Zheng und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Yangzhou University, Yangzhou 225012, China. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Jiangsu Naite Internal High Pressure Forming Technology Co., Ltd..
Abstract (Originalsprache)
The hydroforming performance of trailing arms is governed by the coupled effects of feed parameters, pressure schedules and frictional characteristics. Improper parameter matching readily induces typical forming defects such as wrinkling, cracking and uneven wall thickness. To address this issue, a multi-objective optimization method for hydroforming is proposed in this study. Taking the maximum wall thickness, minimum wall thickness and die-to-workpiece gap of the tubular blank as optimization objectives, and the internal pressure and right-side axial feed velocity as design variables, an integrated numerical simulation framework combining the Archive-based Micro Genetic Algorithm (AMGA) and LS-DYNA is established to analyze the hydroforming process. By adaptively adjusting the key control points of internal pressure and axial feed loading curves, the developed method expands the solution space and realizes the automatic optimization of loading paths. The results reveal that the maximum wall thinning rate of the tubular component drops from 20.4% to 14.8%. Meanwhile, the wall thickness uniformity is improved and forming defects are effectively suppressed while the thickening rate remains stable. Furthermore, a complete round of optimization calculation involving thousands of finite element solutions can yield a complete set of Pareto non-dominated solutions. In this paper, the AMGA multi-objective optimization algorithm is adopted to acquire the optimal loading paths, and physical prototype experiments are carried out relying on self-developed 2000 T hydroforming equipment. Comparisons between measured and simulated wall thickness values of the tubular component show that the maximum relative error is controlled within 7.46%, which verifies the reliable engineering applicability of the proposed optimization scheme and provides new insight into the process optimization for forming similar structural components.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, Yangzhou University, Yangzhou 225012, China.
- Yangzhou Hangying Technology Equipment Co., Ltd., Yangzhou 225800, China.
ORCID-Profile: Zaixiang Zheng, Gang Wu, Zhengjian Pan
Förderung
- National Natural Science Foundation of China
- Jiangsu Naite Internal High Pressure Forming Technology Co., Ltd.
Zitieren
APA
Zheng, Z., Tan, H., Wu, G., Wang, F., Tang, S., Chen, Y., Zhao, Y., Yu, H., & Pan, Z. (2026). Optimization of Loading Path for Hydroforming of Asymmetric Curved Tubes Using AMGA. Materials, 19(14), 3046. https://doi.org/10.3390/ma19143046
Vancouver
Zheng Z, Tan H, Wu G, Wang F, Tang S, Chen Y, et al. Optimization of Loading Path for Hydroforming of Asymmetric Curved Tubes Using AMGA. Materials. 2026;19(14):3046. doi:10.3390/ma19143046
BibTeX
@article{Zheng2026,
author = {Zheng, Zaixiang and Tan, Hui and Wu, Gang and Wang, Feng and Tang, Siyuan and Chen, Yujie and Zhao, Yang and Yu, Hantao and Pan, Zhengjian},
title = {Optimization of Loading Path for Hydroforming of Asymmetric Curved Tubes Using AMGA},
journal = {Materials},
year = {2026},
volume = {19},
number = {14},
pages = {3046},
doi = {10.3390/ma19143046}
}
EUVIMED