Scan Path Optimization and YOLO-Based Detection for Defect Inspection of Curved and Glossy Surfaces
Sensors · 11.05.2026 · 26 (10) · 3026
DOI: 10.3390/s26103026 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 11.05.2026. Verfasst von Min-Gyu Kim und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering (Department of Aeronautics, Mechanical and Electronic Convergence Engineering), Kumoh National Institute of Tech…. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and ICT, regional innovation system & education (RISE).Ministry of Education, Information Technology Research Center.
Abstract (Originalsprache)
Product defect inspection is critical in industrial applications; however, it remains increasingly challenging in mass production environments, particularly for glossy or curved surface products. Conventional inspection of such surfaces typically relies on manual visual examination using gauges and operator judgment, which is time consuming and prone to inconsistency. This study proposes a robust defect detection framework for curved and reflective surfaces using a KEYENCE displacement laser sensor. The system integrates the Dijkstra algorithm, the Nearest Neighbor Algorithm, and a Genetic Algorithm to optimize the laser scanning path for structured image data generation. To validate the proposed framework, datasets were generated from both healthy and defective samples and used to train multiple deep learning models. A comparative analysis was conducted using YOLOv8, YOLOv9, YOLOv10, and YOLOv11 architectures. Experimental results demonstrate that YOLOv11 achieved the best overall performance, attaining an mAP50 score of 0.844 while also exhibiting lower computational complexity and faster inference.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering (Department of Aeronautics, Mechanical and Electronic Convergence Engineering), Kumoh National Institute of Technology, 61 Daehak-ro, Gumi-si 39177, Gyeonsangbuk-do, Republic of Kore…
ORCID-Profile: Min-Gyu Kim, Chibuzo Nwabufo Okwuosa, Jang-Wook Hur
Förderung
- Ministry of Science and ICT
- regional innovation system & education (RISE).Ministry of Education
- Information Technology Research Center
Zitieren
APA
Kim, M. G., Okwuosa, C. N., & Hur, J. W. (2026). Scan Path Optimization and YOLO-Based Detection for Defect Inspection of Curved and Glossy Surfaces. Sensors, 26(10), 3026. https://doi.org/10.3390/s26103026
Vancouver
Kim MG, Okwuosa CN, Hur JW. Scan Path Optimization and YOLO-Based Detection for Defect Inspection of Curved and Glossy Surfaces. Sensors. 2026;26(10):3026. doi:10.3390/s26103026
BibTeX
@article{Kim2026,
author = {Kim, Min-Gyu and Okwuosa, Chibuzo Nwabufo and Hur, Jang-Wook},
title = {Scan Path Optimization and YOLO-Based Detection for Defect Inspection of Curved and Glossy Surfaces},
journal = {Sensors},
year = {2026},
volume = {26},
number = {10},
pages = {3026},
doi = {10.3390/s26103026}
}
EUVIMED