EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermoacoustic Curing Mechanism and Process Optimization in Non-Contact Ultrasonic 3D Printing

Yang Xu, Siqi Yu, Zhiwei Ji, Xiangchen He, Wenlong Xie, Qiangbing Lu, Feng Han, Zheng Li, Guoqing Jin iD, Minghui Lu

Materials · 13.07.2026 · 19 (14) · 3019

DOI: 10.3390/ma19143019 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 13.07.2026. Verfasst von Yang Xu und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Electrical Engineering, Soochow University, Suzhou 215100, China. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Key Project of the National Natural Science Foundation Joint Fund of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Non-contact ultrasonic three-dimensional (3D) printing has emerged as a promising alternative to conventional energy-curing manufacturing techniques. However, an insufficient understanding of its underlying curing mechanisms still limits the precise regulation of solidification behavior and stable structural forming. In this context, this work develops a customized ultrasonic printing platform to investigate the thermoacoustic curing behavior of a modified PDMS-based material system. A multiphysics numerical model is established to characterize the focal acoustic pressure, concentrated energy distribution, and transient temperature evolution during printing. Simulated and experimental results collectively indicate that solidification behavior is governed by the balance between localized acoustic energy confinement and thermal diffusion. Systematic experiments are further conducted to quantify the effects of driving power, scanning speed, and line spacing on forming quality. The optimized parameter combination (17.5 W driving power, 0.4 mm/s scanning speed, and 0.2–0.25 mm line spacing) enables stable single-track morphology and favorable interlayer bonding. Additionally, reciprocating scanning trajectories are found to promote localized thermal accumulation, which may introduce dimensional deviations in printed structures. This study provides insights into ultrasonic thermoacoustic curing behavior and offers feasible process guidance for ultrasonic additive manufacturing under the specific material and experimental configurations adopted in this work.

Schlagwörter

Stichwörter der Autor:innen

Polydimethylsiloxane (PDMS)energy localizationprocess windowthermoacoustic curingultrasonic additive manufacturing

Autor:innen und Institutionen

  • School of Mechanical and Electrical Engineering, Soochow University, Suzhou 215100, China.
  • Research Institute of Advanced Manufacturing Technology, Soochow University, Suzhou 215100, China.
  • International Institute of Acoustic Technology, Suzhou 215500, China.
  • College of Engineering and Applied Sciences, Nanjing University, Nanjing 210023, China.

ORCID-Profile: Guoqing Jin

Förderung

  • National Natural Science Foundation of China
  • Key Project of the National Natural Science Foundation Joint Fund of China

Zitieren

APA

Xu, Y., Yu, S., Ji, Z., He, X., Xie, W., Lu, Q., Han, F., Li, Z., Jin, G., & Lu, M. (2026). Thermoacoustic Curing Mechanism and Process Optimization in Non-Contact Ultrasonic 3D Printing. Materials, 19(14), 3019. https://doi.org/10.3390/ma19143019

Vancouver

Xu Y, Yu S, Ji Z, He X, Xie W, Lu Q, et al. Thermoacoustic Curing Mechanism and Process Optimization in Non-Contact Ultrasonic 3D Printing. Materials. 2026;19(14):3019. doi:10.3390/ma19143019

BibTeX
@article{Xu2026,
  author = {Xu, Yang and Yu, Siqi and Ji, Zhiwei and He, Xiangchen and Xie, Wenlong and Lu, Qiangbing and Han, Feng and Li, Zheng and Jin, Guoqing and Lu, Minghui},
  title = {Thermoacoustic Curing Mechanism and Process Optimization in Non-Contact Ultrasonic 3D Printing},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {14},
  pages = {3019},
  doi = {10.3390/ma19143019}
}
Kostenlos starten →