EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Assessment of the Strength of Welded Joints in a Gas Pipeline Using FEM Modeling

Olha Zvirko iD, Ihor Dzioba iD, Tadeusz Pała iD, Dmytro Demianchuk, Oleksandr Tsyrulnyk iD

Materials · 09.07.2026 · 19 (14) · 2959

DOI: 10.3390/ma19142959 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.07.2026. Verfasst von Olha Zvirko und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Diagnostics of Materials Corrosion-Hydrogen Degradation, Karpenko Physico-Mechanical Institute of the National Academy of Sciences of U…. Die Arbeit nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Repurposing existing natural gas pipelines for hydrogen service requires an assessment of their current technical condition and remaining lifetime, especially those that may have reached or exceeded their design life. In this study, the strength of welded joints in the X52 steel gas pipeline after 36 years of operation and in the as-received state was investigated, focusing on circumferential welded joints. Hardness distributions in the welded joint zones (the weld metal, the heat-affected zone and the base metal) were determined, and the values of the material’s strength and plasticity characteristics were estimated based on the correlation equations. This enables assessment of the stress–strain relationships for the metal from different zones of welded joints, which were compared with the experimental results determined from uniaxial tensile testing. Finite element models of welded joints were developed, in which the relevant material zones were defined in accordance with established stress–strain relationships, and the stress–strain distributions in the welded joints subjected to simulated tensile loading were determined, identifying the areas under the greatest stress. For the welded joint after 36 years of operation, the normalized graphs show higher relative extreme values of σ11/σys = 1.25 compared to the as-received state, where σ11/σys = 1.1. In the as-received welded joint, strain concentration was observed for a stress load about 5% lower than the σys of the base metal, while in the operated one, a local strain increase was observed for a load even 11% lower than the σys of the base metal.

Schlagwörter

Stichwörter der Autor:innen

FEMgas pipelinehardnessmechanical propertiesmicrostructuremodelingsteel X52strength propertieswelded joint

Autor:innen und Institutionen

  • Department of Diagnostics of Materials Corrosion-Hydrogen Degradation, Karpenko Physico-Mechanical Institute of the National Academy of Sciences of Ukraine, 5 Naukova St., 79060 Lviv, Ukraine.
  • Department of Strength of Materials and Structural Diagnostics, Kielce University of Technology, Av. 1000-An. of Polish State, 7, 25-314 Kielce, Poland.
  • Department of Machine Design, Faculty of Mechatronics and Mechanical Engineering, Kielce University of Technology, Av. 1000-An. of Polish State, 7, 25-314 Kielce, Poland.

ORCID-Profile: Olha Zvirko, Ihor Dzioba, Tadeusz Pała, Oleksandr Tsyrulnyk

Förderung

  • Ministry of Science and Higher Education

Zitieren

APA

Zvirko, O., Dzioba, I., Pała, T., Demianchuk, D., & Tsyrulnyk, O. (2026). Assessment of the Strength of Welded Joints in a Gas Pipeline Using FEM Modeling. Materials, 19(14), 2959. https://doi.org/10.3390/ma19142959

Vancouver

Zvirko O, Dzioba I, Pała T, Demianchuk D, Tsyrulnyk O. Assessment of the Strength of Welded Joints in a Gas Pipeline Using FEM Modeling. Materials. 2026;19(14):2959. doi:10.3390/ma19142959

BibTeX
@article{Zvirko2026,
  author = {Zvirko, Olha and Dzioba, Ihor and Pała, Tadeusz and Demianchuk, Dmytro and Tsyrulnyk, Oleksandr},
  title = {Assessment of the Strength of Welded Joints in a Gas Pipeline Using FEM Modeling},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {14},
  pages = {2959},
  doi = {10.3390/ma19142959}
}
Kostenlos starten →