EUVIMEDEUVIMED entdecken
Crossref

Tensile Strength and Microstructural Evaluation of a Tungsten Inert Gas and Metal Inert Gas Welded Joints

A. O. Igbeka, N. Osazemwende, J. Adjerese, S. Owhe, S. Sada

Journal of Applied Sciences and Environmental Management · 28.02.2026 · 30 (2) · 550-555

DOI: 10.4314/jasem.v30i2.20 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Sciences and Environmental Management, online erschienen am 28.02.2026. Verfasst von A. O. Igbeka und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The objective of this paper was to evaluate the tensile strength and microstructural evaluation of a tungsten inert gas (TIG) and metal inert gas (MIG) welded joints using appropriate standard procedures. Data obtained reveals the optimal tensile strength (N/mm2) of 191.21N/mm2 for tungsten inert gas (TIG), and 190.79N/mm2 for metal inert gas (MIG) welds respectively. The optimal strength for both welding processes was subjected to microstructural test, to establish the effect of the welding speed, input and cooling rate was established. It can be noted that the higher the welding speed, under the same welding current, the finer the dendritic structure becomes. In this case, the growth rate (R) increased with the welding speed, and the temperature gradient as the liquid–solid interface rose due to the decrease in heat input, resulting in a higher cooling rate and finer structure.

Zitieren

APA

Igbeka, A. O., Osazemwende, N., Adjerese, J., Owhe, S., & Sada, S. (2026). Tensile Strength and Microstructural Evaluation of a Tungsten Inert Gas and Metal Inert Gas Welded Joints. Journal of Applied Sciences and Environmental Management, 30(2), 550-555. https://doi.org/10.4314/jasem.v30i2.20

Vancouver

Igbeka AO, Osazemwende N, Adjerese J, Owhe S, Sada S. Tensile Strength and Microstructural Evaluation of a Tungsten Inert Gas and Metal Inert Gas Welded Joints. Journal of Applied Sciences and Environmental Management. 2026;30(2):550-555. doi:10.4314/jasem.v30i2.20

BibTeX
@article{Igbeka2026,
  author = {Igbeka, A. O. and Osazemwende, N. and Adjerese, J. and Owhe, S. and Sada, S.},
  title = {Tensile Strength and Microstructural Evaluation of a Tungsten Inert Gas and Metal Inert Gas Welded Joints},
  journal = {Journal of Applied Sciences and Environmental Management},
  year = {2026},
  volume = {30},
  number = {2},
  pages = {550--555},
  doi = {10.4314/jasem.v30i2.20}
}
Kostenlos starten →