EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A 3D-Printed Compliant Polishing Tool for High-Efficiency Finishing of P20 Mold Steel

Kerong Wang, Xingyuan Liu, Mingyu Zhu iD, Changfei Tang, Jianxiu Su iD, Jiapeng Chen iD, Yongwei Zhu

Materials · 09.07.2026 · 19 (14) · 2954

DOI: 10.3390/ma19142954 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.07.2026. Verfasst von Kerong Wang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Jiangsu Key Laboratory of Precision and Micro-Manufacturing Technology, College of Mechanical and Electrical Engineering, Nanjing University of Aeron…. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Shanghai, Key Science and Technology Plan Project of Jinhua City.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the pervasive engineering challenges of rigid interference and subpar machining efficiency encountered during the complex freeform surface polishing of P20 mold steel, this study proposes and fabricates a structurally designed, five-petal composite compliant polishing tool via fused granulation fabrication (FGF). The tool structurally integrates a passive thermoplastic polyurethane (TPU) compliant buffer layer with an active PA66/diamond micro-cutting functional layer, achieving monolithic precision assembly through dual-temperature-zone 3D printing. Tensile mechanical characterization (n = 6) reveals that the composite interface attains an average ultimate tensile strength (UTS) of 59.39 ± 15.41 MPa (with a peak of 78.90 MPa) and an average elongation at break of 27.42 ± 7.41%, demonstrating exceptional structural robustness and fracture toughness under heavy-load abrasive machining conditions. During adaptive polishing validations on complex convex topographies and deep concave mold cavities, the compliant tool effectively compensated for normal vector spatial errors intrinsic to three-axis CNC machining via passive geometric adaptation. Topographical evaluations suggest a ductile-regime, differential asperity planarization material removal paradigm, which is attributed to the macroscopic 3D elastic deformation of the tool synergized with the proposed compliance of the polymer matrix. Following high-intensity sequential polishing regimens, the original macroscopic milling striations were substantially reduced. Quantitative profilometric analysis reveals that the average surface roughness of the convex profiles decreased from an initial 13.33 µm to 7.42 µm, while that of the restrictive deep concave features was reduced from 10.84 µm to 4.11 µm. Ultimately, this technological framework circumvents the traditional reliance on capital-intensive, six-degree-of-freedom robotic platforms, providing a scalable automated polishing protocol compatible with standard CNC systems for the cost-effective surface planarization of precision molds.

Schlagwörter

Stichwörter der Autor:innen

3D printingP20 mold steelcomplex surfaceselastic grinding headpolishing process

Autor:innen und Institutionen

  • Jiangsu Key Laboratory of Precision and Micro-Manufacturing Technology, College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China.
  • Aeronautical Engineering College, Jinhua University of Vocational Technology, Jinhua 321017, China.
  • School of Electro-Mechanical Engineering, Zhongyuan Institute of Science and Technology, Xuchang 461000, China.
  • Research Center for Advanced Micro-/Nano- Fabrication Materials, School of Chemistry and Chemical Engineering, Shanghai University of Engineering Science, Shanghai 201620, China.
  • College of Mechanical and Electrical Engineering, China University of Metrology, Hangzhou 310018, China.
  • Hebi Tianhai Electronic Information System Co., Ltd., Hebi 458030, China.

ORCID-Profile: Mingyu Zhu, Jianxiu Su, Jiapeng Chen

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Shanghai
  • Key Science and Technology Plan Project of Jinhua City
  • Henan Provincial Science and Technology R&D Plan Joint Fund

Zitieren

APA

Wang, K., Liu, X., Zhu, M., Tang, C., Su, J., Chen, J., & Zhu, Y. (2026). A 3D-Printed Compliant Polishing Tool for High-Efficiency Finishing of P20 Mold Steel. Materials, 19(14), 2954. https://doi.org/10.3390/ma19142954

Vancouver

Wang K, Liu X, Zhu M, Tang C, Su J, Chen J, et al. A 3D-Printed Compliant Polishing Tool for High-Efficiency Finishing of P20 Mold Steel. Materials. 2026;19(14):2954. doi:10.3390/ma19142954

BibTeX
@article{Wang2026,
  author = {Wang, Kerong and Liu, Xingyuan and Zhu, Mingyu and Tang, Changfei and Su, Jianxiu and Chen, Jiapeng and Zhu, Yongwei},
  title = {A 3D-Printed Compliant Polishing Tool for High-Efficiency Finishing of P20 Mold Steel},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {14},
  pages = {2954},
  doi = {10.3390/ma19142954}
}
Kostenlos starten →