Effect of Manual Tungsten Inert Gas Welding on the Microstructure and Mechanical Properties of Welded Joints in Thick SIMP Steel Plates
Materials · 08.07.2026 · 19 (14) · 2944
DOI: 10.3390/ma19142944 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 08.07.2026. Verfasst von Yunxia Chen und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Intelligent Manufacturing and Engineering, Shanghai Polytechnic University, Pudong New Area, Jinhai Road, Shanghai 201209, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
The novel martensitic heat-resistant SIMP steel is considered a primary candidate structural material for Accelerator Driven Sub-critical Systems (ADSs) due to its excellent comprehensive properties. However, welding difficulties arising from its high alloy content represent a major bottleneck for its engineering application. This study explored and established optimized manual Tungsten Inert Gas (TIG) welding process parameters suitable for 20 mm thick SIMP steel plates, involving 24 layers and 110 passes, with an average heat input of approximately 4 kJ/cm, successfully achieving well-formed and defect-free welds. The welded joints were investigated using optical microscopy, scanning electron microscopy, and other performance tests. The results revealed the presence of δ-ferrite and a small amount of brittle Laves phase in the weld metal, leading to uneven hardness distribution. Furthermore, poor interfacial coordination between δ-ferrite and tempered martensite significantly reduced the ductility of the joint. Through optimized process parameters, the impact energy of the weld metal reached 183.9 J, while that of the heat-affected zone was 77.9 J. The room temperature ultimate tensile strength and yield strength of the joint were 802.63 MPa and 596.33 MPa, respectively, meeting the weld performance requirements stipulated in GB/T 38875-2020. This research provides data support for promoting the engineering application of SIMP steel in fields such as nuclear power and for enhancing the long-term service reliability of welded structures.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Intelligent Manufacturing and Engineering, Shanghai Polytechnic University, Pudong New Area, Jinhai Road, Shanghai 201209, China.
- School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Chen, Y., Zhang, W., Lyu, S., & Dai, J. (2026). Effect of Manual Tungsten Inert Gas Welding on the Microstructure and Mechanical Properties of Welded Joints in Thick SIMP Steel Plates. Materials, 19(14), 2944. https://doi.org/10.3390/ma19142944
Vancouver
Chen Y, Zhang W, Lyu S, Dai J. Effect of Manual Tungsten Inert Gas Welding on the Microstructure and Mechanical Properties of Welded Joints in Thick SIMP Steel Plates. Materials. 2026;19(14):2944. doi:10.3390/ma19142944
BibTeX
@article{Chen2026,
author = {Chen, Yunxia and Zhang, Weiming and Lyu, Shanshan and Dai, Jun},
title = {Effect of Manual Tungsten Inert Gas Welding on the Microstructure and Mechanical Properties of Welded Joints in Thick SIMP Steel Plates},
journal = {Materials},
year = {2026},
volume = {19},
number = {14},
pages = {2944},
doi = {10.3390/ma19142944}
}
EUVIMED