EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Behavior and Deformation Mechanisms of Nanotwinned Heterogeneous Ultrafine-Grained Austenitic Stainless Steel at Elevated Temperature

Hongjing Ma, Rui Ke iD, Hua Zheng, Shuangqi Hu iD

Materials · 04.07.2026 · 19 (13) · 2857

DOI: 10.3390/ma19132857 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 04.07.2026. Verfasst von Hongjing Ma und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Nuclear Technology and Chemistry & Biology, Hubei University of Science and Technology, Xianning 437100, China. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Program of Hubei Province, Ph.D. of Hubei University of Science and Technology launches fund project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to investigate the effects of heterogeneous microstructure and strain rate on the microstructural evolution and mechanical properties of ultrafine-grained (UFG) austenitic stainless steel during elevated-temperature tension. In this research, 17Cr-10Ni austenitic stainless steel was rolled to a 60% reduction in thickness at room temperature and 200 °C, followed by annealing at 1000 °C and 500 °C, respectively. The microstructural evolution of the annealed samples and high-temperature tensile specimens was characterized using optical microscopy, transmission electron microscopy, scanning electron microscopy equipped with electron backscatter diffraction, and X-ray diffraction. Results show that at room temperature, the heterogeneous twinned UFG (TW-UFG) sample, influenced by hetero-deformation-induced stress strengthening, maintains good ductility while exhibiting higher strength than the uniform UFG sample. During tensile deformation at 600 °C, grain refinement still contributes to strengthening, and the dominant deformation mechanism in the uniform UFG sample is dislocation dynamic recovery, whereas in the TW-UFG sample is detwinning combined with dynamic dislocation recovery. At low strain rates (10−4 s−1), sufficient dynamic recovery and detwinning in the TW-UFG sample delay plastic instability and improve elongation.

Schlagwörter

Stichwörter der Autor:innen

deformation mechanismdetwinningelevated-temperature tensionheterogeneous microstructure

Autor:innen und Institutionen

  • School of Nuclear Technology and Chemistry & Biology, Hubei University of Science and Technology, Xianning 437100, China.
  • Hubei Key Laboratory of Radiation Chemistry and Functional Materials, Hubei University of Science and Technology, Xianning 437100, China.
  • Collaborative Innovation Center for Advanced Steels, Wuhan University of Science and Technology, Wuhan 430081, China.

ORCID-Profile: Rui Ke, Shuangqi Hu

Förderung

  • Science and Technology Program of Hubei Province
  • Ph.D. of Hubei University of Science and Technology launches fund project

Zitieren

APA

Ma, H., Ke, R., Zheng, H., & Hu, S. (2026). Mechanical Behavior and Deformation Mechanisms of Nanotwinned Heterogeneous Ultrafine-Grained Austenitic Stainless Steel at Elevated Temperature. Materials, 19(13), 2857. https://doi.org/10.3390/ma19132857

Vancouver

Ma H, Ke R, Zheng H, Hu S. Mechanical Behavior and Deformation Mechanisms of Nanotwinned Heterogeneous Ultrafine-Grained Austenitic Stainless Steel at Elevated Temperature. Materials. 2026;19(13):2857. doi:10.3390/ma19132857

BibTeX
@article{Ma2026,
  author = {Ma, Hongjing and Ke, Rui and Zheng, Hua and Hu, Shuangqi},
  title = {Mechanical Behavior and Deformation Mechanisms of Nanotwinned Heterogeneous Ultrafine-Grained Austenitic Stainless Steel at Elevated Temperature},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {13},
  pages = {2857},
  doi = {10.3390/ma19132857}
}
Kostenlos starten →