EUVIMEDEUVIMED entdecken
Crossref

Effect of Prehardening Treatment on Microstructure, Mechanical Properties, and Deformation Mechanisms of 304 Austenitic Stainless Steel

Chang Liu, Hongbang Shao, Yuanchun Huang, Yu Liu, Jinqiang Mo

steel research international · 08.06.2026

DOI: 10.1002/srin.70538 ↗

Kurz gefasst

Fachartikel in der Zeitschrift steel research international, online erschienen am 08.06.2026. Verfasst von Chang Liu und 4 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Gefördert von: National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The microstructure, mechanical response, and deformation mechanism of 304 austenitic stainless steel (ASS) in solution‐treated, H 1/4‐hardened, and H 1/2‐hardened conditions were investigated. Microstructure characterization demonstrated that the prehardening treatment leads to a significant increase in dislocation density and the formation of a high proportion of low‐angle grain boundaries and substructures, as well as a small amount of strain‐induced α ′‐martensite. Uniaxial tensile test results revealed that prehardening treatment significantly enhances the mechanical properties of 304 ASS. The H 1/2‐hardened sample achieved a yield strength of 936 MPa and an ultimate tensile strength of 1043 MPa, while maintaining an elongation of 24.1%, indicating a desirable strength–ductility synergy. Moreover, the crystallographic texture and Schmid factor distribution suggested a strong variant selectivity of strain‐induced martensitic transformation, resulting in pronounced orientation differences between the austenitic and martensitic phases after deformation. Prehardening treatment induced a transition in the slip mechanism from inhomogeneous slip to wavy slip, accompanied by a change in the fracture mode from ductile to brittle fracture. Based on the analysis of microstructure evolution and strain hardening behavior with different initial characteristics during subsequent deformation, dislocation strengthening was identified as the dominant strengthening mechanism.

Förderung

  • National Key Research and Development Program of China

Zitieren

APA

Liu, C., Shao, H., Huang, Y., Liu, Y., & Mo, J. (2026). Effect of Prehardening Treatment on Microstructure, Mechanical Properties, and Deformation Mechanisms of 304 Austenitic Stainless Steel. steel research international. https://doi.org/10.1002/srin.70538

Vancouver

Liu C, Shao H, Huang Y, Liu Y, Mo J. Effect of Prehardening Treatment on Microstructure, Mechanical Properties, and Deformation Mechanisms of 304 Austenitic Stainless Steel. steel research international. 2026. doi:10.1002/srin.70538

BibTeX
@article{Liu2026,
  author = {Liu, Chang and Shao, Hongbang and Huang, Yuanchun and Liu, Yu and Mo, Jinqiang},
  title = {Effect of Prehardening Treatment on Microstructure, Mechanical Properties, and Deformation Mechanisms of 304 Austenitic Stainless Steel},
  journal = {steel research international},
  year = {2026},
  doi = {10.1002/srin.70538}
}
Kostenlos starten →