Influence of Y2O3 Particle Size on the Microstructure, Corrosion Resistance, and Wear Resistance of Electrodeposited Ni-W-Y2O3 Composite Coatings
Materials · 03.07.2026 · 19 (13) · 2850
DOI: 10.3390/ma19132850 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 03.07.2026. Verfasst von Shilong Xing und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Construction Machinery, Shandong Jiaotong University, 5001 Haitang Road, Jinan 250357, China. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Ni-W-Y2O3 composite coatings were electrodeposited from a sulfate citrate electrolyte incorporating Y2O3 particles of three different sizes: 50 nm, 1 μm, and 2 μm. This study systematically investigates the impact of Y2O3 particle size on the microstructure, microhardness, corrosion resistance, and wear resistance of the composite coatings. The incorporation of Y2O3 particles leads to notable grain refinement, with the crystallite size decreasing from 31.8 nm for the pure Ni W coating to 17.3 nm, 19.0 nm, and 20.1 nm for the C-50 nm, C-1 μm, and C-2 μm coatings, respectively. Correspondingly, the microhardness increases from 540.2 HV for the unreinforced coating to 732.5 HV, 641.0 HV, and 629.5 HV for the C-50 nm, C-1 μm, and C-2 μm coatings, respectively. In terms of corrosion resistance, the C-50 nm coating exhibits the best performance in both acidic and neutral media, with the lowest corrosion current density of 3.72 μA/cm2 in 10 wt.% H2SO4 and 3.53 μA/cm2 in 3.5 wt.% NaCl. In contrast, micron-sized particles show limited improvement in acidic media and even degrade the corrosion resistance in neutral NaCl solution, where the corrosion current density increases to 7.68 μA/cm2 and 7.74 μA/cm2 for the C-1 μm and C-2 μm coatings, respectively. The wear resistance of the composite coatings is significantly enhanced by the incorporation of Y2O3 particles, with the wear rate decreasing from 17.75 × 10−6 mm3 N−1 m−1 for the pure Ni-W coating to 5.65 × 10−6 mm3 N−1 m−1 for the C-50 nm coating. The presence of Y2O3 particles transitions the wear mechanism from predominantly adhesive wear to a combination of adhesive and abrasive wear. These results demonstrate that the particle size of Y2O3 plays a critical role in determining the microstructure and overall performance of Ni-W-Y2O3 composite coatings, with nano-sized particles offering the most significant improvements.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Construction Machinery, Shandong Jiaotong University, 5001 Haitang Road, Jinan 250357, China.
- School of Materials Science and Engineering, Shanghai Jiaotong University, 800 Dongchuan Road, Shanghai 200240, China.
- School of Navigation and Shipping, Shandong Jiaotong University, Weihai 264209, China.
- Faculty of Transportation Engineering, Kunming University of Science and Technology, Kunming 650500, China.
ORCID-Profile: Shuo Wu, Chengxi Wang
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Xing, S., Wu, S., Li, Z., Li, X., Li, W., Jiang, C., & Wang, C. (2026). Influence of Y2O3 Particle Size on the Microstructure, Corrosion Resistance, and Wear Resistance of Electrodeposited Ni-W-Y2O3 Composite Coatings. Materials, 19(13), 2850. https://doi.org/10.3390/ma19132850
Vancouver
Xing S, Wu S, Li Z, Li X, Li W, Jiang C, et al. Influence of Y2O3 Particle Size on the Microstructure, Corrosion Resistance, and Wear Resistance of Electrodeposited Ni-W-Y2O3 Composite Coatings. Materials. 2026;19(13):2850. doi:10.3390/ma19132850
BibTeX
@article{Xing2026,
author = {Xing, Shilong and Wu, Shuo and Li, Zhikun and Li, Xiaocong and Li, Wenbo and Jiang, Chuanhai and Wang, Chengxi},
title = {Influence of Y2O3 Particle Size on the Microstructure, Corrosion Resistance, and Wear Resistance of Electrodeposited Ni-W-Y2O3 Composite Coatings},
journal = {Materials},
year = {2026},
volume = {19},
number = {13},
pages = {2850},
doi = {10.3390/ma19132850}
}
EUVIMED