High-phosphorus Ni–P-WS2 composite coatings prepared by electroless plating: corrosion resistance and wear resistance
Surface Science and Technology · 2026-12 · 4 (1)
DOI: 10.1007/s44251-026-00138-4 ↗Kurz gefasst
Fachartikel in der Zeitschrift Surface Science and Technology, online erschienen am 28.06.2026. Verfasst von Yongkang Liu und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Natural Science Foundation of Chongqing, China, Key research and development project of Jiangxi Province.
Abstract (Originalsprache)
A high-phosphorus Ni–P composite coating co-deposited with tungsten disulfide (WS₂) particles was prepared by electroless plating to improve the wear and corrosion resistance of metal components. The influence of WS₂ concentration (0–4 g/L) on the microstructure, corrosion behavior, and tribological properties was systematically studied. Electrochemical tests showed that the coating with 2 g/L WS₂ exhibited the best corrosion resistance, as evidenced by its noblest corrosion potential (–0.548 V), highest charge transfer resistance in electrochemical impedance spectroscopy, and lower corrosion current density (7.035 × 10⁻⁶ A/cm2). The long-term corrosion resistance of this optimal coating was further validated through a 7-day neutral salt spray test. In addition, the composite coating demonstrated excellent wear resistance with an ultra-low average friction coefficient of 0.024 and a wear rate of 2.7 × 10⁻5 mm3·N⁻1·m⁻1. This study successfully developed a Ni–P-WS₂ composite coating with balanced improvements in both long-term corrosion protection and wear resistance, showing great potential for industrial applications.
Förderung
- Natural Science Foundation of Chongqing, China
- Key research and development project of Jiangxi Province
Zitieren
APA
Liu, Y., Chen, F., Cheng, X., Zeng, X., Ye, Y., Li, Y., & Chen, H. (2026). High-phosphorus Ni–P-WS2 composite coatings prepared by electroless plating: corrosion resistance and wear resistance. Surface Science and Technology, 4(1). https://doi.org/10.1007/s44251-026-00138-4
Vancouver
Liu Y, Chen F, Cheng X, Zeng X, Ye Y, Li Y, et al. High-phosphorus Ni–P-WS2 composite coatings prepared by electroless plating: corrosion resistance and wear resistance. Surface Science and Technology. 2026;4(1). doi:10.1007/s44251-026-00138-4
BibTeX
@article{Liu2026,
author = {Liu, Yongkang and Chen, Feifan and Cheng, Xiang and Zeng, Xianwen and Ye, Yuwei and Li, Yong and Chen, Hao},
title = {High-phosphorus Ni–P-WS2 composite coatings prepared by electroless plating: corrosion resistance and wear resistance},
journal = {Surface Science and Technology},
year = {2026},
volume = {4},
number = {1},
doi = {10.1007/s44251-026-00138-4}
}
EUVIMED