EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparative Analysis of Microstructure, Phase Composition, and Wear Characterization of Fe-Cr-C, Fe-Mn-Mo-B, and Ni-WC Hardfacing Alloys

Jan Pawlik, Pavlo Prysyazhnyuk, Vasyl Vytvytskyi, Iuliia Medvid, Michał Bembenek

Coatings · 30.01.2026 · 16 (2) · 178

DOI: 10.3390/coatings16020178 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 30.01.2026. Verfasst von Jan Pawlik und 4 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education and Science of Ukraine.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wear resistance of hardfaced or cladded protective layers is commonly assessed through hardness measurements. Traditionally, this involves single-point diamond indenter tests. However, in complex cladding alloys, such methods often yield inconsistent results due to significant differences between the hardness of the metallic matrix and harder constituents, such as carbides or nitrides. To address this, the authors performed a series of scratch tests on four wear-resistant hardfacing materials. The method involves producing a scratch under constant load on a polished bead surface and measuring the resulting groove width as an indirect measure of hardness and wear behavior. The study focuses on four FCAW hardfacing wires: a Cr-Si-C-Mn solid cored wire (Alloy A), a Cr-Mo-C-Si-Mn cored wire (Alloy B), a nickel-sheathed macrocrystalline tungsten carbide cored wire (Alloy C), and an original Fe(Mn)-Mo-B-C hardfacing alloy (Alloy D) developed by one of the authors. All materials were deposited on C45 steel substrates. Comparative analysis included scratch tests, abrasion wear tests, and thermodynamic modeling. The scratch test approach proved effective in evaluating and optimizing deposition parameters to achieve improved wear resistance of the investigated Fe–Cr–C, Ni–WC, and Fe–Mo–Mn–B hardfacing systems.

Förderung

  • Ministry of Education and Science of Ukraine

Zitieren

APA

Pawlik, J., Prysyazhnyuk, P., Vytvytskyi, V., Medvid, I., & Bembenek, M. (2026). Comparative Analysis of Microstructure, Phase Composition, and Wear Characterization of Fe-Cr-C, Fe-Mn-Mo-B, and Ni-WC Hardfacing Alloys. Coatings, 16(2), 178. https://doi.org/10.3390/coatings16020178

Vancouver

Pawlik J, Prysyazhnyuk P, Vytvytskyi V, Medvid I, Bembenek M. Comparative Analysis of Microstructure, Phase Composition, and Wear Characterization of Fe-Cr-C, Fe-Mn-Mo-B, and Ni-WC Hardfacing Alloys. Coatings. 2026;16(2):178. doi:10.3390/coatings16020178

BibTeX
@article{Pawlik2026,
  author = {Pawlik, Jan and Prysyazhnyuk, Pavlo and Vytvytskyi, Vasyl and Medvid, Iuliia and Bembenek, Michał},
  title = {Comparative Analysis of Microstructure, Phase Composition, and Wear Characterization of Fe-Cr-C, Fe-Mn-Mo-B, and Ni-WC Hardfacing Alloys},
  journal = {Coatings},
  year = {2026},
  volume = {16},
  number = {2},
  pages = {178},
  doi = {10.3390/coatings16020178}
}
Kostenlos starten →