Towards High-Efficiency Inverted CH3NH3GeI3 Perovskite Solar Cells
Materials · 23.06.2026 · 19 (13) · 2700
DOI: 10.3390/ma19132700 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 23.06.2026. Verfasst von Hong-Tao Li und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, Nanjing Tech University, Nanjing 211816, China. Die Arbeit nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jiangsu Education Department, Jiangsu Higher Education Institution.
Abstract (Originalsprache)
The performance of inverted CH3NH3GeI3 (MAGeI3) perovskite solar cells incorporating both a hole transport layer (HTL) and an electron transport layer (ETL) was investigated using the Solar Cell Capacitance Simulator (SCAPS). Three candidate HTLs, including PEDOT:PSS, MoS2, and WS2, along with five ETLs including PCBM, TiO2, IGZO, ZnO, and SnO2, have been systematically evaluated. The analysis shows that WS2 and SnO2 provided the most favorable hole and electron transport, respectively. To improve device efficiency, the absorber layer thickness, defect density in MAGeI3, doping levels of WS2 and SnO2, as well as the interface defect densities and the work function of indium tin oxide (ITO), have been systematically studied. The optimal absorber layer thickness is determined to be approximately 900 nm. The optimal doping density of both WS2 and SnO2 is 1 × 1019 cm−3. The MAGeI3 layer should maintain a defect density as low as 1 × 1015 cm−3, and the defect densities at MAGeI3 interfaces should remain at 1 × 1015 cm−2. Additionally, an ITO work function of at least 5.2 eV is necessary to prevent the formation of a Schottky barrier at the ITO/WS2 interface. The simulated power conversion efficiency (PCE) can reach 22.9% under these optimized conditions. Our simulation results offer a viable route to develop high-efficiency MAGeI3 perovskite solar cells.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Materials Science and Engineering, Nanjing Tech University, Nanjing 211816, China.
ORCID-Profile: Peng-An Zong
Förderung
- Jiangsu Education Department
- Jiangsu Higher Education Institution
Zitieren
APA
Li, H. T., Yan, K., Wang, J., Zhang, S. S., Zong, P. A., & Feng, X. D. (2026). Towards High-Efficiency Inverted CH3NH3GeI3 Perovskite Solar Cells. Materials, 19(13), 2700. https://doi.org/10.3390/ma19132700
Vancouver
Li HT, Yan K, Wang J, Zhang SS, Zong PA, Feng XD. Towards High-Efficiency Inverted CH3NH3GeI3 Perovskite Solar Cells. Materials. 2026;19(13):2700. doi:10.3390/ma19132700
BibTeX
@article{Li2026,
author = {Li, Hong-Tao and Yan, Kang and Wang, Jin and Zhang, Shuang-Shuang and Zong, Peng-An and Feng, Xiao-Dong},
title = {Towards High-Efficiency Inverted CH3NH3GeI3 Perovskite Solar Cells},
journal = {Materials},
year = {2026},
volume = {19},
number = {13},
pages = {2700},
doi = {10.3390/ma19132700}
}
EUVIMED