High‐Efficiency Inverted Perovskite Solar Cells via In Situ Passivation Directed Crystallization
Advanced Materials · 2024-10 · 36 (41)
DOI: 10.1002/adma.202408101 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 14.08.2024. Verfasst von Yanchun Huang und 12 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Silicon and Advanced Semiconductor Materials, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou, 3…. Die Arbeit wurde bisher 126-mal zitiert (Crossref) und nennt 38 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Lead halide perovskite solar cells (PSCs) have emerged as one of the influential photovoltaic technologies with promising cost‐effectiveness. Though with mild processabilities to massive production, inverted PSCs have long suffered from inferior photovoltaic performances due to intractable defective states at boundaries and interfaces. Herein, an in situ passivation (ISP) method is presented to effectively adjust crystal growth kinetics and obtain the well‐orientated perovskite films with the passivated boundaries and interfaces, successfully enabled the new access of high‐performance inverted PSCs. The study unravels that the strong yet anisotropic ISP additive adsorption between different facets and the accompanied additive engineering yield the high‐quality (111)‐orientated perovskite crystallites with superior photovoltaic properties. The ISP‐derived inverted perovskite solar cells (PSCs) have achieved remarkable power conversion efficiencies (PCEs) of 26.7% (certified as 26.09% at a 5.97 mm 2 active area) and 24.5% (certified as 23.53% at a 1.28 cm 2 active area), along with decent operational stabilities.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Silicon and Advanced Semiconductor Materials, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou, 310027, P. R. China.
- State Key Laboratory of Integrated Optoelectronics, Key Laboratory of Automobile Materials of MOE, and School of Materials Science and Engineering, Jilin University, Changchun, 130012, P. R. China.
- State Key Laboratory of Silicon and Advanced Semiconductor Materials, School of Materials Science and Engineering, Zhejiang University, Hangzhou, 310027, P. R. China.
ORCID-Profile: Yanchun Huang, Chang-Zhi Li
Förderung
- National Natural Science Foundation of China
- National Key Research and Development Program of China
- Fundamental Research Funds for the Central Universities
- Scientific Research Project of China Three Gorges Corporation
Zitieren
APA
Huang, Y., Yan, K., Wang, X., Li, B., Niu, B., Yan, M., Shen, Z., Zhou, K., Fang, Y., Yu, X., Chen, H., Zhang, L., & Li, C. Z. (2024). High‐Efficiency Inverted Perovskite Solar Cells via In Situ Passivation Directed Crystallization. Advanced Materials, 36(41). https://doi.org/10.1002/adma.202408101
Vancouver
Huang Y, Yan K, Wang X, Li B, Niu B, Yan M, et al. High‐Efficiency Inverted Perovskite Solar Cells via In Situ Passivation Directed Crystallization. Advanced Materials. 2024;36(41). doi:10.1002/adma.202408101
BibTeX
@article{Huang2024,
author = {Huang, Yanchun and Yan, Kangrong and Wang, Xinjiang and Li, Biao and Niu, Benfang and Yan, Minxing and Shen, Ziqiu and Zhou, Kun and Fang, Yanjun and Yu, Xuegong and Chen, Hongzheng and Zhang, Lijun and Li, Chang-Zhi},
title = {High‐Efficiency Inverted Perovskite Solar Cells via In Situ Passivation Directed Crystallization},
journal = {Advanced Materials},
year = {2024},
volume = {36},
number = {41},
doi = {10.1002/adma.202408101}
}
EUVIMED