EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Anisotropic Graphene Oxide Aerogels for Vegetable Oil Absorption

Daniel Ordóñez Oviedo, Nelly Maria Rosas-Laverde, Arturo Barjola, Enrique Giménez iD, Alina Iuliana Pruna iD

Materials · 22.06.2026 · 19 (12) · 2680

DOI: 10.3390/ma19122680 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.06.2026. Verfasst von Daniel Ordóñez Oviedo und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials, Escuela Politécnica Nacional, Quito 170524, Ecuador. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Oil spills represent a critical environmental challenge. The wastewater treatment with porous sorbents presents the advantage of higher uptake and recyclability. In this work, highly porous and low-density three-dimensional reduced graphene oxide aerogels were obtained by hydrothermal reduction followed by lyophilization. The porosity and reduction degree of the aerogels were controlled by the addition of reducing species, namely ethylenediamine, and hydrothermal conditions. The aerogels were characterized using scanning electron microscopy, Raman spectroscopy, and energy-dispersive X-ray analysis. The sorption measurements were performed with vegetable oils, namely canola and olive oil, at varying operating temperatures. The morphological analysis revealed a well-defined porosity gradient along the aerogel length, along with a functionalization gradient. The sorption performance is highly dependent on their combined action. The maximum gravimetric absorption capacity was about 122 g g−1 at room temperature, increasing to 156 g g−1 at 60 °C, with the absorption rate increasing from about 1 g g−1 s−1 to 15 g g−1 s−1 within 10 s. These results demonstrate that anisotropic gradient aerogels could be obtained by simple tailoring of the synthesis conditions, and such aerogels could benefit the sorption of oils with higher viscosities in terms of rate, pore filling and retention.

Schlagwörter

Stichwörter der Autor:innen

EDAabsorptionaerogelsoilreduced graphene oxide

Autor:innen und Institutionen

  • Department of Materials, Escuela Politécnica Nacional, Quito 170524, Ecuador.
  • Instituto Universitario de Tecnología de Materiales, Universitat Politècnica de València (UPV), Camino de Vera s/n, 46022 Valencia, Spain.

ORCID-Profile: Enrique Giménez, Alina Iuliana Pruna

Zitieren

APA

Ordóñez Oviedo, D., Rosas-Laverde, N. M., Barjola, A., Giménez, E., & Pruna, A. I. (2026). Anisotropic Graphene Oxide Aerogels for Vegetable Oil Absorption. Materials, 19(12), 2680. https://doi.org/10.3390/ma19122680

Vancouver

Ordóñez Oviedo D, Rosas-Laverde NM, Barjola A, Giménez E, Pruna AI. Anisotropic Graphene Oxide Aerogels for Vegetable Oil Absorption. Materials. 2026;19(12):2680. doi:10.3390/ma19122680

BibTeX
@article{OrdezOviedo2026,
  author = {Ordóñez Oviedo, Daniel and Rosas-Laverde, Nelly Maria and Barjola, Arturo and Giménez, Enrique and Pruna, Alina Iuliana},
  title = {Anisotropic Graphene Oxide Aerogels for Vegetable Oil Absorption},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2680},
  doi = {10.3390/ma19122680}
}
Kostenlos starten →