EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Mixed Reduction Approach on the Oil Absorption Capacity of Graphene Oxide Aerogels

Carlos Cargua iD, Nelly Maria Rosas-Laverde, Arturo Barjola, Enrique Giménez iD, Alina Iuliana Pruna iD

Materials · 06.02.2026 · 19 (3) · 632

DOI: 10.3390/ma19030632 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 06.02.2026. Verfasst von Carlos Cargua und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials, Escuela Politécnica Nacional, Quito 170524, Ecuador. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study evaluates the impact of a comprehensive design integrating precursor type, reduction and freeze-casting on the development of aerogels with high sorption capacity for engine oil. In this respect, the graphene oxide was varied from commercial to expanded; the reduction approach relied either on purely hydrothermal or combined hydrothermal–chemical reduction approaches. Following the synthesis, freeze-casting was applied at −5 °C and −196 °C. To further improve the reduction degree, annealing in an inert atmosphere was employed upon drying. The effects of precursors, reduction approach, freeze-casting and annealing were systematically investigated. Characterization techniques, including FT-IR, Raman spectroscopy, SEM, and EDS, were used to correlate the degree of reduction and morphological features of the porous structure with the absorption properties. The use of expanded GO as a precursor yielded aerogels with more homogeneous three-dimensional networks, a reduced bulk density of 3 mg cm−3, and lower oxygen-containing functional group content, thereby achieving consistently superior oil absorption of 270 g g−1, with an oil occupancy of 94%. The process was found to fit well with the pseudo-first-order kinetic model. The results demonstrate that a comprehensive approach—considering combined reduction, freeze-casting, and thermal annealing—enables the tailored optimization of both the structure and absorption performance of GO aerogels for the remediation of oil spills.

Schlagwörter

Stichwörter der Autor:innen

aerogelsannealingfreeze-castinggraphene oxideoil absorptionreduction

Autor:innen und Institutionen

  • Department of Materials, Escuela Politécnica Nacional, Quito 170524, Ecuador.
  • Instituto Universitario de Tecnología de Materiales, Universitat Politècnica de València (UPV), Camino de Vera s/n, 46022 Valencia, Spain.

ORCID-Profile: Carlos Cargua, Enrique Giménez, Alina Iuliana Pruna

Zitieren

APA

Cargua, C., Rosas-Laverde, N. M., Barjola, A., Giménez, E., & Pruna, A. I. (2026). Effect of Mixed Reduction Approach on the Oil Absorption Capacity of Graphene Oxide Aerogels. Materials, 19(3), 632. https://doi.org/10.3390/ma19030632

Vancouver

Cargua C, Rosas-Laverde NM, Barjola A, Giménez E, Pruna AI. Effect of Mixed Reduction Approach on the Oil Absorption Capacity of Graphene Oxide Aerogels. Materials. 2026;19(3):632. doi:10.3390/ma19030632

BibTeX
@article{Cargua2026,
  author = {Cargua, Carlos and Rosas-Laverde, Nelly Maria and Barjola, Arturo and Giménez, Enrique and Pruna, Alina Iuliana},
  title = {Effect of Mixed Reduction Approach on the Oil Absorption Capacity of Graphene Oxide Aerogels},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {3},
  pages = {632},
  doi = {10.3390/ma19030632}
}
Kostenlos starten →