Influence of Mix Composition on the Microstructural Evolution of Leached Cement Pastes
Materials · 21.06.2026 · 19 (12) · 2664
DOI: 10.3390/ma19122664 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 21.06.2026. Verfasst von Kailai Zhang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Hubei Key Laboratory of Water Engineering Materials and Application Technology, China Three Gorges Corporation, No.1, Liuhe Road, Wuhan 430010, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Department of Hubei Province, China Three Gorges Corporation (China).
Abstract (Originalsprache)
Calcium leaching increases the hydraulic concrete material’s porosity and the diffusion coefficient, thereby jeopardizing engineering safety. Fly ash and silica fume are commonly used mineral admixtures in hydraulic concrete, and their effects on the material’s leaching characteristics, especially its microstructural and transport properties, require further investigation. In this study, calcium leaching tests were conducted on cement paste (CP), silica fume–cement paste (SF), and fly ash–cement paste (FA) using a 6 mol/L ammonium chloride solution to accelerate the leaching process. Subsequently, a series of quantitative and qualitative analyses was performed on the deteriorated specimens, including phenolphthalein indicator spraying, X-ray diffraction (XRD), nuclear magnetic resonance (NMR), and scanning electron microscopy (SEM). Additionally, the diffusion coefficients of the material at different locations were calculated and analyzed. The results show that partially replacing cement with silica fume or fly ash increases the initial porosity, gel pore content, and initial diffusion coefficients. After 28 days of leaching, compared to the initial values, the porosity increases in the 0–4 mm layer from the leached surface were 83.6% for CP, 11.0% for SF, and 39.0% for FA. The diffusion coefficients increased by factors of 14.3 (CP), 6.1 (SF), and 13.6 (FA), indicating enhanced resistance to leaching. The primary reason for this is that the reactive silica in the admixtures undergoes a pozzolanic reaction with the calcium hydroxide generated by cement hydration, producing additional calcium silicate hydrate (C-S-H) gel, which reduces the capillary pores that would otherwise result from calcium hydroxide decomposition.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Hubei Key Laboratory of Water Engineering Materials and Application Technology, China Three Gorges Corporation, No.1, Liuhe Road, Wuhan 430010, China.
Förderung
- Science and Technology Department of Hubei Province
- China Three Gorges Corporation (China)
Zitieren
APA
Zhang, K., Li, W., Yang, H., Tian, D., Cui, J., Wang, H., & Li, F. (2026). Influence of Mix Composition on the Microstructural Evolution of Leached Cement Pastes. Materials, 19(12), 2664. https://doi.org/10.3390/ma19122664
Vancouver
Zhang K, Li W, Yang H, Tian D, Cui J, Wang H, et al. Influence of Mix Composition on the Microstructural Evolution of Leached Cement Pastes. Materials. 2026;19(12):2664. doi:10.3390/ma19122664
BibTeX
@article{Zhang2026,
author = {Zhang, Kailai and Li, Wenwei and Yang, Huamei and Tian, Dan and Cui, Jinyang and Wang, Hao and Li, Fan},
title = {Influence of Mix Composition on the Microstructural Evolution of Leached Cement Pastes},
journal = {Materials},
year = {2026},
volume = {19},
number = {12},
pages = {2664},
doi = {10.3390/ma19122664}
}
EUVIMED