EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hydration and Microstructural Evolution of Cement Pastes Incorporating Submerged Arc Welding Slag

Carlos Rodríguez, Fernando Fernández, Marina Sánchez, Pablo Gómez, Miriam Hernández, Isidro Sánchez

Infrastructures · 01.08.2026 · 11 (8) · 268

DOI: 10.3390/infrastructures11080268 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Infrastructures, online erschienen am 01.08.2026. Verfasst von Carlos Rodríguez und 5 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Commission, UKRI.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The valorisation of industrial by-products as supplementary cementitious materials is a promising strategy to reduce clinker consumption and improve the sustainability of cement-based materials. In this study, the influence of submerged arc welding (SAW) slag on the hydration behaviour and microstructural evolution of cement pastes was investigated. Two SAW slags from different industrial sources were incorporated as partial replacements of ordinary Portland cement at 5%, 15%, and 30% by mass. Cement pastes were prepared with water-to-binder ratios of 0.3 and 0.4 and characterised through setting time, water demand, mercury intrusion porosimetry (MIP), differential scanning calorimetry (DSC), and X-ray diffraction (XRD). The results showed that SAW slag systematically delayed both initial and final setting times, while having only a negligible effect on water demand. Under the fixed mix conditions adopted in this study, this retardation is interpreted as the combined effect of clinker dilution and modified fresh-state conditions. MIP analysis revealed higher early-age porosity in SAW-containing pastes, particularly at high replacement levels and higher water-to-binder ratios, although mixtures with up to 15% slag approached the reference pore structure at later ages. Thermal analysis indicated lower bound water and portlandite contents at early ages, mainly due to clinker dilution, while long-term hydration development remained comparable at moderate replacement levels. At higher slag contents, some mixtures showed higher calcium carbonate contents, suggesting a tendency toward increased carbonate formation under the investigated conditions. Overall, the results indicate that SAW slag primarily affected early paste behaviour and pore structure development, with clinker dilution appearing to be the main mechanism, although weak secondary physical or chemical contributions cannot be completely excluded.

Förderung

  • European Commission
  • UKRI

Zitieren

APA

Rodríguez, C., Fernández, F., Sánchez, M., Gómez, P., Hernández, M., & Sánchez, I. (2026). Hydration and Microstructural Evolution of Cement Pastes Incorporating Submerged Arc Welding Slag. Infrastructures, 11(8), 268. https://doi.org/10.3390/infrastructures11080268

Vancouver

Rodríguez C, Fernández F, Sánchez M, Gómez P, Hernández M, Sánchez I. Hydration and Microstructural Evolution of Cement Pastes Incorporating Submerged Arc Welding Slag. Infrastructures. 2026;11(8):268. doi:10.3390/infrastructures11080268

BibTeX
@article{Rodrguez2026,
  author = {Rodríguez, Carlos and Fernández, Fernando and Sánchez, Marina and Gómez, Pablo and Hernández, Miriam and Sánchez, Isidro},
  title = {Hydration and Microstructural Evolution of Cement Pastes Incorporating Submerged Arc Welding Slag},
  journal = {Infrastructures},
  year = {2026},
  volume = {11},
  number = {8},
  pages = {268},
  doi = {10.3390/infrastructures11080268}
}
Kostenlos starten →