Optimization of Mixture Parameters for Rubber-Modified Permeable Concrete Bricks Using Response Surface Methodology
Materials · 20.06.2026 · 19 (12) · 2660
DOI: 10.3390/ma19122660 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 20.06.2026. Verfasst von Jiaxiong Zhan und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering and Technology, China University of Geosciences, Beijing 100083, China. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangzhou Marine Geological Survey, Department of Science and Technology of Guangdong Province, Science and Technology Projects in Key Areas of Nansha District.
Abstract (Originalsprache)
Permeable concrete bricks incorporating waste tire rubber particles were prepared to improve sustainability and optimize the balance between mechanical performance and hydraulic behavior. Orthogonal experiments and response surface methodology were used to investigate the effects of aggregate-to-binder ratio (A/B), water-to-binder ratio (W/B), rubber content, and rubber particle size on compressive strength and permeability coefficient. Results showed that rubber content dominated compressive strength, while A/B ratio had the greatest influence on permeability. Compressive strength decreased continuously with increasing rubber content and A/B ratio, whereas permeability increased with A/B ratio and showed non-monotonic responses to rubber content and particle size. Response surface optimization identified an optimum mixture: A/B = 3.006, W/B = 0.45, rubber content = 0.103, and rubber particle size = 0.525 mm, yielding a compressive strength of 18.97 MPa and a permeability coefficient of 1.82 mm/s. Validation tests showed relative errors of 1.32% for compressive strength and 3.85% for the permeability coefficient, respectively. SEM and CT analyses revealed that the performance of the permeable concrete bricks was governed by the balance among skeleton integrity, interfacial bonding, and pore connectivity. These findings support the valorization of waste tire rubber in sustainable permeable paving materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Engineering and Technology, China University of Geosciences, Beijing 100083, China.
- State Key Laboratory of Deep Earth Exploration and Imaging, China University of Geosciences, Beijing 100083, China.
- Guangzhou Marine Geological Survey, Guangzhou 511458, China.
- National Engineering Research Center for Natural Gas Hydrate Exploration and Development, Guangzhou 511458, China.
ORCID-Profile: Wei Qiao
Förderung
- Guangzhou Marine Geological Survey
- Department of Science and Technology of Guangdong Province
- Science and Technology Projects in Key Areas of Nansha District
- Geological Survey Projects of China Geological Survey
- National Natural Science Foundation of China
- Major Basic and Applied Basic Projects of Guangdong Provincial Department of Science and Technology
Zitieren
APA
Zhan, J., Qiao, W., Qin, Y., Luo, Z., Shi, H., & Li, J. (2026). Optimization of Mixture Parameters for Rubber-Modified Permeable Concrete Bricks Using Response Surface Methodology. Materials, 19(12), 2660. https://doi.org/10.3390/ma19122660
Vancouver
Zhan J, Qiao W, Qin Y, Luo Z, Shi H, Li J. Optimization of Mixture Parameters for Rubber-Modified Permeable Concrete Bricks Using Response Surface Methodology. Materials. 2026;19(12):2660. doi:10.3390/ma19122660
BibTeX
@article{Zhan2026,
author = {Zhan, Jiaxiong and Qiao, Wei and Qin, Yiran and Luo, Zhihua and Shi, Haoxian and Li, Jing},
title = {Optimization of Mixture Parameters for Rubber-Modified Permeable Concrete Bricks Using Response Surface Methodology},
journal = {Materials},
year = {2026},
volume = {19},
number = {12},
pages = {2660},
doi = {10.3390/ma19122660}
}
EUVIMED