EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preliminary CFD-Based Assessment of Additively Manufactured Muffler Insert Geometries

Tomáš Zvoníček iD, Libor Novák, Petr Smolka iD

Materials · 19.06.2026 · 19 (12) · 2645

DOI: 10.3390/ma19122645 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 19.06.2026. Verfasst von Tomáš Zvoníček und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics and Materials Engineering, Faculty of Technology, Tomas Bata University in Zlín, Vavrečkova 5669, 760 01 Zlín, Czech Republic. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education Youth and Sports, Tomas Bata University in Zlín, European Union under the OP Jan Amos Comenius.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the impact of internal muffler geometry on flow-related dissipation characteristics potentially relevant to acoustic behavior using steady-state Computational Fluid Dynamics (CFD) simulations. Four variants were analyzed: an empty tube, considered to be a baseline model, a three-chamber baffle system, a single spiral channel, and a complex multi-channel insert manufacturable only via advanced additive technologies. Simulations were conducted in SimScale using a compressible flow model with the k-ω SST turbulence formulation. Key outputs included static pressure distribution and turbulent kinetic energy (TKE), both of which were evaluated as qualitative surrogate indicators associated with flow-induced energy dissipation phenomena. The results indicate that geometries incorporating spiral features modify flow redistribution patterns, pressure gradients and localized turbulence intensity, suggesting potential applicability for future acoustic optimization studies. The study highlights how additive manufacturing enables the integration of geometrically complex internal structures otherwise unattainable through conventional methods. By comparing pressure drop and TKE patterns with internal design features, the research offers a preliminary CFD-based framework for geometry screening and conceptual evaluation of muffler insert designs for automotive exhaust systems. This approach provides computational support for rapid comparative assessment prior to experimental validation and detailed acoustic analysis.

Schlagwörter

Stichwörter der Autor:innen

3D-printed insertsCFD simulationacoustic attenuationflow-induced noisemuffler designturbulent kinetic energy

Autor:innen und Institutionen

  • Department of Physics and Materials Engineering, Faculty of Technology, Tomas Bata University in Zlín, Vavrečkova 5669, 760 01 Zlín, Czech Republic.
  • Centre of Polymer Systems, Tomas Bata University in Zlín, Třída Tomáš Bati 5678, 760 01 Zlín, Czech Republic.

ORCID-Profile: Tomáš Zvoníček, Petr Smolka

Förderung

  • Ministry of Education Youth and Sports
  • Tomas Bata University in Zlín
  • European Union under the OP Jan Amos Comenius
  • DKRVO
  • TBU

Zitieren

APA

Zvoníček, T., Novák, L., & Smolka, P. (2026). Preliminary CFD-Based Assessment of Additively Manufactured Muffler Insert Geometries. Materials, 19(12), 2645. https://doi.org/10.3390/ma19122645

Vancouver

Zvoníček T, Novák L, Smolka P. Preliminary CFD-Based Assessment of Additively Manufactured Muffler Insert Geometries. Materials. 2026;19(12):2645. doi:10.3390/ma19122645

BibTeX
@article{Zvonek2026,
  author = {Zvoníček, Tomáš and Novák, Libor and Smolka, Petr},
  title = {Preliminary CFD-Based Assessment of Additively Manufactured Muffler Insert Geometries},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2645},
  doi = {10.3390/ma19122645}
}
Kostenlos starten →