EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fatigue strength assessment of additively manufactured component considering local quality

Kalle Lipiäinen, Antti Ahola, Hannu Lund, Sakari Penttilä, Nima Razavi, Tuomas Skriko, Jonas Hensel, Masoud Moshtaghi, Timo Björk

Welding in the World · 2025-08 · 69 (8) · 2279-2291

DOI: 10.1007/s40194-025-02002-9 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Welding in the World, online erschienen am 04.03.2025. Verfasst von Kalle Lipiäinen und 8 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Business Finland, European Regional Development Fund, LUT University (previously Lappeenranta University of Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Direct energy deposition with wire and arc system (DED-Arc) is a form of additive manufacturing (AM), which is particularly advantageous for producing large-scale components. Surface waviness and local imperfections are typical in as-built DED-Arc components. In this study, literature data regarding fatigue performance of additive manufactured materials is gathered, and experimental tests for DED-Arc specimens are conducted to characterize typical features and relation between local quality and fatigue performance. Finite element modelling is used to evaluate local stresses, followed by obtaining effective stresses via theory of critical distances (TCD) approach. The findings are compared to literature data to evaluate fatigue strength assessment methods. The results indicated that quality-based modelling enables fatigue strength assessment with a reduced number of SN curves in comparison to the nominal stress method.

Förderung

  • Business Finland
  • European Regional Development Fund
  • LUT University (previously Lappeenranta University of Technology

Zitieren

APA

Lipiäinen, K., Ahola, A., Lund, H., Penttilä, S., Razavi, N., Skriko, T., Hensel, J., Moshtaghi, M., & Björk, T. (2025). Fatigue strength assessment of additively manufactured component considering local quality. Welding in the World, 69(8), 2279-2291. https://doi.org/10.1007/s40194-025-02002-9

Vancouver

Lipiäinen K, Ahola A, Lund H, Penttilä S, Razavi N, Skriko T, et al. Fatigue strength assessment of additively manufactured component considering local quality. Welding in the World. 2025;69(8):2279-2291. doi:10.1007/s40194-025-02002-9

BibTeX
@article{Lipiinen2025,
  author = {Lipiäinen, Kalle and Ahola, Antti and Lund, Hannu and Penttilä, Sakari and Razavi, Nima and Skriko, Tuomas and Hensel, Jonas and Moshtaghi, Masoud and Björk, Timo},
  title = {Fatigue strength assessment of additively manufactured component considering local quality},
  journal = {Welding in the World},
  year = {2025},
  volume = {69},
  number = {8},
  pages = {2279--2291},
  doi = {10.1007/s40194-025-02002-9}
}
Kostenlos starten →