EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Mineral Raw Materials on Melting–Crystallization Properties and Microstructure of Fluorine-Free Mold Flux for High-Titanium Steel Continuous Casting

Di Zhang iD, Xiuli Han, Lei Liu iD, Ziyao Liu, Yue Yang, Lei Wu, Ziyi Zhang

Materials · 17.06.2026 · 19 (12) · 2600

DOI: 10.3390/ma19122600 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 17.06.2026. Verfasst von Di Zhang und 6 weiteren Autor:innen. Beteiligte Einrichtung: College of Mining Engineering, North China University of Science and Technology, Tangshan 063210, China. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hebei Provincial Department of Science and Technology, Tangshan Science and Technology Plan Funding Project, Natural Science Foundation of Hebei Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

During the continuous casting of high-titanium steel, traditional fluorine-containing mold fluxes are prone to causing fluoride contamination, equipment corrosion, and intensified slag–metal interface reactions. There is an urgent need to develop highly adaptable fluorine-free mold flux systems. In this study, titanium-containing blast furnace slag was used as the primary base material, while borax, soda ash, and witherite were selected as fluoride-substituting mineral raw materials. The effects of these mineral raw materials on the melting properties, crystallization behavior, crystalline phases, and microstructure of fluorine-free mold fluxes were systematically investigated, and an optimized mold flux design suitable for continuous casting of high-titanium steel was further developed. The results indicate that borax significantly reduces the melting temperature and viscosity and markedly suppresses the growth of crystalline phases such as calcium borosilicate, nepheline, and perovskite by weakening the polymerization degree of the silicate network, thereby substantially decreasing the crystallization ability of the mold flux. Soda ash primarily acts as a strong fluxing and network-depolymerizing agent, promoting the formation of low-polymerized structural units. It also enhances the tendency toward ordered atomic arrangement, thereby markedly increasing nepheline precipitation and the overall crystallization ratio. Witherite exerts a relatively mild effect on slag structure and phase evolution; its moderate addition helps synergistically reduce the melting point, viscosity, and crystallization ratio, thereby supporting performance stability. The optimized fluorine-free mold flux, designed on the basis of these findings, maintains a suitable initial crystallization temperature and critical crystallization cooling rate while exhibiting lower melting temperature, viscosity, and crystallization ratio than conventional fluorine-bearing flux. The findings establish a theoretical basis for designing eco-friendly mold fluxes suitable for high-titanium steel and for enhancing billet quality.

Schlagwörter

Stichwörter der Autor:innen

crystallization propertiesfluorine-free mold fluxhigh-titanium steelmelting propertiesmicrostructuremineral raw materials

Autor:innen und Institutionen

  • College of Mining Engineering, North China University of Science and Technology, Tangshan 063210, China.
  • Collaborative Innovation Center of Green Development and Ecological Restoration of Mineral Resources, Tangshan 063210, China.
  • College of Metallurgy and Energy, North China University of Science and Technology, Tangshan 063210, China.

ORCID-Profile: Di Zhang, Lei Liu

Förderung

  • Hebei Provincial Department of Science and Technology
  • Tangshan Science and Technology Plan Funding Project
  • Natural Science Foundation of Hebei Province

Zitieren

APA

Zhang, D., Han, X., Liu, L., Liu, Z., Yang, Y., Wu, L., & Zhang, Z. (2026). Effects of Mineral Raw Materials on Melting–Crystallization Properties and Microstructure of Fluorine-Free Mold Flux for High-Titanium Steel Continuous Casting. Materials, 19(12), 2600. https://doi.org/10.3390/ma19122600

Vancouver

Zhang D, Han X, Liu L, Liu Z, Yang Y, Wu L, et al. Effects of Mineral Raw Materials on Melting–Crystallization Properties and Microstructure of Fluorine-Free Mold Flux for High-Titanium Steel Continuous Casting. Materials. 2026;19(12):2600. doi:10.3390/ma19122600

BibTeX
@article{Zhang2026,
  author = {Zhang, Di and Han, Xiuli and Liu, Lei and Liu, Ziyao and Yang, Yue and Wu, Lei and Zhang, Ziyi},
  title = {Effects of Mineral Raw Materials on Melting–Crystallization Properties and Microstructure of Fluorine-Free Mold Flux for High-Titanium Steel Continuous Casting},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2600},
  doi = {10.3390/ma19122600}
}
Kostenlos starten →