The Performance Evolution of Porous Asphalt Mixtures in Hot In-Place Recycling with the Addition of Different Rejuvenators
Materials · 16.06.2026 · 19 (12) · 2597
DOI: 10.3390/ma19122597 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 16.06.2026. Verfasst von Dongcang Sun und 6 weiteren Autor:innen. Beteiligte Einrichtung: Research Center of Road, Research Institute of Highway Ministry of Transport, Beijing 100088, China. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Institute of Highway Ministry of Transport, Research Institute of Highway Ministry of Transport of China.
Abstract (Originalsprache)
With the increased application of porous asphalt, the recycling and reutilization of aged materials have become a critical issue for sustainable pavement engineering. This study investigates the evolution of the performance characteristics of porous asphalt mixtures under high-temperature heating conditions, with the aim of providing a theoretical basis for hot in-place recycling (HIR) technology in the rehabilitation of porous asphalt pavements. The heating states of asphalt, mortar and mixtures in HIR were simulated using controlled oven heating. Their microscopic, mechanical and thermal properties were evaluated under different aging conditions and with the incorporation of different rejuvenators. The results show that asphalt aging intensifies with the increasing heating temperature and time. The incorporation of bio-based rejuvenators significantly alleviates aging effects and demonstrates superior performance compared to conventional rejuvenators. Furthermore, aggregates and rejuvenators enhance the thermal conductivity of materials, while aging reduces the thermal conductivity coefficient and increases the risk of temperature gradient diseases. The rheological properties of asphalt are closely related to the degree of aging. While aging mitigation improves low-temperature cracking resistance and acoustic damping performance, it may compromise high-temperature deformation resistance. In conclusion, to achieve an optimal balance between performance recovery and aging control, it is recommended that the HIR of porous asphalt pavements be conducted at a heating temperature of 180 °C for 5 min, with the addition of 3% bio-based rejuvenator.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Research Center of Road, Research Institute of Highway Ministry of Transport, Beijing 100088, China.
Förderung
- Research Institute of Highway Ministry of Transport
- Research Institute of Highway Ministry of Transport of China
Zitieren
APA
Sun, D., Li, M., Li, J., Han, D., Li, R., Cui, Y., & Gao, W. (2026). The Performance Evolution of Porous Asphalt Mixtures in Hot In-Place Recycling with the Addition of Different Rejuvenators. Materials, 19(12), 2597. https://doi.org/10.3390/ma19122597
Vancouver
Sun D, Li M, Li J, Han D, Li R, Cui Y, et al. The Performance Evolution of Porous Asphalt Mixtures in Hot In-Place Recycling with the Addition of Different Rejuvenators. Materials. 2026;19(12):2597. doi:10.3390/ma19122597
BibTeX
@article{Sun2026,
author = {Sun, Dongcang and Li, Mingliang and Li, Jun and Han, Dingding and Li, Renfei and Cui, Yingchen and Gao, Wenyue},
title = {The Performance Evolution of Porous Asphalt Mixtures in Hot In-Place Recycling with the Addition of Different Rejuvenators},
journal = {Materials},
year = {2026},
volume = {19},
number = {12},
pages = {2597},
doi = {10.3390/ma19122597}
}
EUVIMED