EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Two Tempering Treatments at Different Temperatures on Microstructure and Room/High-Temperature Wear Resistance of H13 Steel

Weiwei Song, Yongbin Liu, Shan Tang, Mengyuan Dai, Zhijun Wu

Materials · 16.06.2026 · 19 (12) · 2585

DOI: 10.3390/ma19122585 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.06.2026. Verfasst von Weiwei Song und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Electrical Engineering and Automation, Anhui University, Hefei 230039, China. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Anhui Tunxi High Pressure Valve Co., Ltd..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As a typical Cr-Mo-V series hot work die steel, H13 steel is widely used in hot extrusion dies under harsh service conditions. Tempering is a vital post-quenching process for regulating microstructural evolution and comprehensive mechanical properties. Since relevant systematic comparative studies remain insufficient, industrial-grade H13 steel was adopted in this work. Specimens were quenched at 1000 °C, followed by single tempering at 520 °C and double tempering at 580 °C. Their microstructure, microhardness, and wear resistance at 25 °C and 580 °C were characterized, and the underlying mechanisms were analyzed. The results show that single tempering at 520 °C produces tempered martensite and finely dispersed carbides with secondary hardening behavior. Its microhardness reaches 590.83 HV, resulting in the best wear resistance at both room and high temperatures. Double tempering at 580 °C causes carbide coarsening, and the microhardness slightly declines to 580.60 HV. Although toughness is enhanced and residual stress is fully released, wear resistance deteriorates. This study optimizes the tempering parameters for H13 steel, provides technical support for die production, and offers theoretical guidance for the technical upgrading of the hot work die steel industry.

Schlagwörter

Stichwörter der Autor:innen

H13 steeldouble temperingmicrohardnessmicrostructurewear resistance

Autor:innen und Institutionen

  • School of Electrical Engineering and Automation, Anhui University, Hefei 230039, China.
  • Anhui Tunxi High Pressure Valve Co., Ltd., Huangshan 245061, China.
  • School of Mechanical and Electrical Engineering, Huangshan University, Huangshan 245041, China.
  • School of Intelligent Manufacturing, Anhui University of Science and Technology, Chuzhou 233000, China.

Förderung

  • Anhui Tunxi High Pressure Valve Co., Ltd.

Zitieren

APA

Song, W., Liu, Y., Tang, S., Dai, M., & Wu, Z. (2026). Effects of Two Tempering Treatments at Different Temperatures on Microstructure and Room/High-Temperature Wear Resistance of H13 Steel. Materials, 19(12), 2585. https://doi.org/10.3390/ma19122585

Vancouver

Song W, Liu Y, Tang S, Dai M, Wu Z. Effects of Two Tempering Treatments at Different Temperatures on Microstructure and Room/High-Temperature Wear Resistance of H13 Steel. Materials. 2026;19(12):2585. doi:10.3390/ma19122585

BibTeX
@article{Song2026,
  author = {Song, Weiwei and Liu, Yongbin and Tang, Shan and Dai, Mengyuan and Wu, Zhijun},
  title = {Effects of Two Tempering Treatments at Different Temperatures on Microstructure and Room/High-Temperature Wear Resistance of H13 Steel},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2585},
  doi = {10.3390/ma19122585}
}
Kostenlos starten →