EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure, Properties, and Reversed Austenite Transformation Behavior of 04Cr13Ni5Mo Maraging Stainless Steel at Different Tempering Temperatures

Hongru Lyu iD, Shoutai Rui, Yamin Peng, Xue Ji, Anhao Li, Deli Zhao, Qingxian Ma

Materials · 07.06.2026 · 19 (12) · 2440

DOI: 10.3390/ma19122440 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 07.06.2026. Verfasst von Hongru Lyu und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Clean and Efficient Turbomachinery Power Equipment, Department of Mechanical Engineering, Tsinghua University, Beijing 100084…. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Technology of the People's Republic of China, National key research and development project of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The influence of tempering temperature within the range of 520 °C to 640 °C on the microstructure and mechanical properties of 04Cr13Ni5Mo maraging stainless steel was systematically studied. The evolution of crystallographic orientation information, such as phase ratio and grain boundary ratio of the studied steel at different tempering temperatures, was studied by utilizing the electron backscatter diffraction (EBSD) technique. Furthermore, the element distribution at typical tempering temperatures was quantitatively analyzed by utilizing the electron probe microanalysis (EPMA) technique. Results indicated that the microstructure of the studied steel at different tempering temperatures is mainly composed of tempered sorbite. As the tempering temperature increased from 520 °C to 640 °C, the proportion of low-angle grain boundaries gradually increased while the proportion of large-angle grain boundaries decreased. The content of reversed austenite showed a sharp increase with the elevation of tempering temperature and peaked at approximately 9.0% at a tempering temperature of 640 °C. With the tempering temperature increasing from 520 °C to 640 °C, the strength of the studied steel showed a trend of first decreasing, then stabilizing, and then decreasing again, while the plasticity showed a stable upward trend. When the tempering temperature was 610 °C, the strength, plasticity, and toughness of the studied steel achieved the optimal match. The enrichment of the Ni element during the austenite reverse phase transformation process was confirmed as the predominant factor ensuring the stability of the reverse austenite to room temperature.

Schlagwörter

Stichwörter der Autor:innen

maraging stainless steelmechanical propertiesreverse austenitereverse phase transformation

Autor:innen und Institutionen

  • State Key Laboratory of Clean and Efficient Turbomachinery Power Equipment, Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China.
  • China First Heavy Industries, Qiqihar 161042, China.

ORCID-Profile: Hongru Lyu

Förderung

  • Ministry of Science and Technology of the People's Republic of China
  • National key research and development project of China

Zitieren

APA

Lyu, H., Rui, S., Peng, Y., Ji, X., Li, A., Zhao, D., & Ma, Q. (2026). Microstructure, Properties, and Reversed Austenite Transformation Behavior of 04Cr13Ni5Mo Maraging Stainless Steel at Different Tempering Temperatures. Materials, 19(12), 2440. https://doi.org/10.3390/ma19122440

Vancouver

Lyu H, Rui S, Peng Y, Ji X, Li A, Zhao D, et al. Microstructure, Properties, and Reversed Austenite Transformation Behavior of 04Cr13Ni5Mo Maraging Stainless Steel at Different Tempering Temperatures. Materials. 2026;19(12):2440. doi:10.3390/ma19122440

BibTeX
@article{Lyu2026,
  author = {Lyu, Hongru and Rui, Shoutai and Peng, Yamin and Ji, Xue and Li, Anhao and Zhao, Deli and Ma, Qingxian},
  title = {Microstructure, Properties, and Reversed Austenite Transformation Behavior of 04Cr13Ni5Mo Maraging Stainless Steel at Different Tempering Temperatures},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2440},
  doi = {10.3390/ma19122440}
}
Kostenlos starten →