EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Wear Behavior of Laser-Cladded TiN-Reinforced AlCoCrFeNi High-Entropy Alloy Coatings on 304 Stainless Steel

Qian Deng, Ying Wang, Yuxuan Liu, Zhigang Hu, Ming Ma, Mao Zhang iD, Yong Ai

Materials · 13.06.2026 · 19 (12) · 2563

DOI: 10.3390/ma19122563 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 13.06.2026. Verfasst von Qian Deng und 6 weiteren Autor:innen. Beteiligte Einrichtung: College of Artificial Intelligence, Wuchang University of Technology, Wuhan 430223, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

AlCoCrFeNi high-entropy alloy coatings reinforced with different TiN contents (2 wt.%, 4 wt.%, and 6 wt.%) were fabricated on 304 stainless steel by laser cladding. The effects of TiN addition on the microstructure, hardness, friction behavior, and wear resistance of the coatings were investigated. Dry reciprocating sliding tests were conducted under a load of 10 N, a frequency of 5 Hz, a stroke length of 5 mm, and a duration of 20 min using GCr15 bearing steel balls as the counterpart. The results showed that the 2 wt.% TiN coating exhibited the best tribological performance within the investigated composition range, with a microhardness of 579.6 HV0.5, a relatively low and stable friction coefficient of approximately 0.30–0.35, and a wear rate of 2.9 × 10−4 mm3/(N·m). When the TiN content increased to 4 wt.% and 6 wt.%, the wear resistance decreased, which was mainly associated with particle agglomeration, local stress concentration, and brittle spalling. These results indicate that appropriate TiN addition can improve the load-bearing capacity and wear resistance of laser-cladded AlCoCrFeNi coatings, providing a potential surface-strengthening strategy for 304 stainless steel components under dry sliding conditions.

Schlagwörter

Stichwörter der Autor:innen

friction and wearhigh-entropy alloyslaser claddingmicrostructure

Autor:innen und Institutionen

  • College of Artificial Intelligence, Wuchang University of Technology, Wuhan 430223, China.
  • School of Mechanical Engineering, Wuhan Polytechnic University, Wuhan 430023, China.
  • State Key Laboratory of Materials Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, 1037 Luoyu Road, Wuhan 430074, China.
  • Hubei Lioho-Tianlun Machinery Co., Ltd., No. 1 Chuangye Road, Xiantao Industry Zone, Xiantao 433001, China.

ORCID-Profile: Mao Zhang

Zitieren

APA

Deng, Q., Wang, Y., Liu, Y., Hu, Z., Ma, M., Zhang, M., & Ai, Y. (2026). Wear Behavior of Laser-Cladded TiN-Reinforced AlCoCrFeNi High-Entropy Alloy Coatings on 304 Stainless Steel. Materials, 19(12), 2563. https://doi.org/10.3390/ma19122563

Vancouver

Deng Q, Wang Y, Liu Y, Hu Z, Ma M, Zhang M, et al. Wear Behavior of Laser-Cladded TiN-Reinforced AlCoCrFeNi High-Entropy Alloy Coatings on 304 Stainless Steel. Materials. 2026;19(12):2563. doi:10.3390/ma19122563

BibTeX
@article{Deng2026,
  author = {Deng, Qian and Wang, Ying and Liu, Yuxuan and Hu, Zhigang and Ma, Ming and Zhang, Mao and Ai, Yong},
  title = {Wear Behavior of Laser-Cladded TiN-Reinforced AlCoCrFeNi High-Entropy Alloy Coatings on 304 Stainless Steel},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2563},
  doi = {10.3390/ma19122563}
}
Kostenlos starten →