Enhancing Wear Resistance of Ni@WC‐Reinforced Laser Cladding Coatings on 304 Stainless Steel Through the Substrate–Coating Synergistic Effect
Advanced Engineering Materials · 04.11.2026 · 28 (21)
DOI: 10.1002/adem.71218 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 27.08.2026. Verfasst von Qingyi Wang und 6 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben.
Abstract (Originalsprache)
304 austenitic stainless steel exhibits inadequate hardness and wear resistance, which restricts its application in extreme tribological environments. In this work, Ni@WC‐reinforced composite coatings with Ni@WC contents of 25, 50, and 75 wt% were fabricated on 304 stainless steel substrates via laser cladding. The influence of Ni@WC content on the microstructure, microhardness, and tribological performance was systematically investigated. Results indicate that Ni@WC additions significantly refine the grain structure. With increasing Ni@WC content, the microstructure transitions from coarse equiaxed austenitic microstructure to uniformly refined dendrites, eventually forming a brittle interconnected network. The microhardness of the composite coatings exhibits a monotonic upward trend with increasing Ni@WC content. The 50 wt% Ni@WC coating achieves optimal wear resistance, reducing the wear rate to 0.32 × 10 −4 mm 3 /(N m) and decreasing mass loss by 69.6% relative to the substrate. Correspondingly, the dominant wear mechanism shifts from severe adhesive wear of the substrate to a mild abrasive and oxidative wear regime. The superior performance is synergistically attributed to grain refinement, dispersion strengthening, and the Orowan looping mechanism. This study establishes a theoretical foundation for the design of high‐performance wear‐resistant coatings on 304 stainless steel surfaces.
Zitieren
APA
Wang, Q., Wang, X., Cui, J., Li, J., Qi, M., Cui, X., & Nong, Z. (2026). Enhancing Wear Resistance of Ni@WC‐Reinforced Laser Cladding Coatings on 304 Stainless Steel Through the Substrate–Coating Synergistic Effect. Advanced Engineering Materials, 28(21). https://doi.org/10.1002/adem.71218
Vancouver
Wang Q, Wang X, Cui J, Li J, Qi M, Cui X, et al. Enhancing Wear Resistance of Ni@WC‐Reinforced Laser Cladding Coatings on 304 Stainless Steel Through the Substrate–Coating Synergistic Effect. Advanced Engineering Materials. 2026;28(21). doi:10.1002/adem.71218
BibTeX
@article{Wang2026,
author = {Wang, Qingyi and Wang, Xugang and Cui, Jiaming and Li, Jilong and Qi, Mingyue and Cui, Xue and Nong, Zhisheng},
title = {Enhancing Wear Resistance of Ni@WC‐Reinforced Laser Cladding Coatings on 304 Stainless Steel Through the Substrate–Coating Synergistic Effect},
journal = {Advanced Engineering Materials},
year = {2026},
volume = {28},
number = {21},
doi = {10.1002/adem.71218}
}
EUVIMED