EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Strength Nanotwinned Copper Combined with Silicon/Silicon Nitride/Graphite Anode for High-Performance Lithium-Ion Battery

Fu-Chian Chen, Rahmandhika Firdauzha Hary Hernandha, Dinh-Phuc Tran iD, Jeng-Kuei Chang iD, Chih Chen iD

Materials · 10.06.2026 · 19 (12) · 2496

DOI: 10.3390/ma19122496 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.06.2026. Verfasst von Fu-Chian Chen und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, National Yang Ming Chiao Tung University, Hsinchu 300093, Taiwan. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council, Center for Advanced Semiconductor Technology Research.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Graphite is widely used as an anode in lithium-ion batteries (LIBs); however, its limited capacity restricts the energy density enhancement. Si-based anodes offer much higher capacity, but their significant volume changes during repeated lithiation and delithiation generate mechanical stress and can damage the electrode/current-collector interface. Herein, high-strength nanotwinned Cu (NT-Cu) was fabricated and employed as current collectors for carbon-coated Si/β-Si3N4-based anodes. The electroplated 5 μm-thick NT-Cu foils exhibited tensile strength exceeding 760 MPa. The role of the Cu current collector was investigated by comparing NT-Cu foils with different mechanical properties and commercial Cu foils. The results show that electrochemical performance was not governed by UTS alone; instead, a balanced combination of tensile strength, ductility, and surface morphology was important for improving cycling stability and rate capability. To further improve cycling retention, artificial graphite was incorporated into the Si/β-Si3N4 composite. Using a 5 μm electroplated NT-Cu foil and a Si/β-Si3N4/artificial graphite composite anode, the pouch cell retained 81.51% of its capacity and delivered 267.3 mAh g−1 after 206 cycles. These results demonstrate the potential of NT-Cu for improving the stability of Si-containing LIB anodes.

Schlagwörter

Stichwörter der Autor:innen

artificial graphitecopper foilhigh-rate retentionlithium-ion batterymechanical propertiessilicon nitride

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, National Yang Ming Chiao Tung University, Hsinchu 300093, Taiwan.
  • MATCHA ROOM®, Jl. Monginsidi, Pacul Permai A-19, Bojonegoro 62114, East Java, Indonesia.
  • Graduate Institute of Manufacturing Technology, National Taipei University of Technology, Taipei 106344, Taiwan.
  • Department of Chemical Engineering and R&D Center for Membrane Technology, Chung Yuan Christian University, 200 Chung Pei Road, Taoyuan 32023, Taiwan.

ORCID-Profile: Dinh-Phuc Tran, Jeng-Kuei Chang, Chih Chen

Förderung

  • National Science and Technology Council
  • Center for Advanced Semiconductor Technology Research

Zitieren

APA

Chen, F. C., Hernandha, R. F. H., Tran, D. P., Chang, J. K., & Chen, C. (2026). High-Strength Nanotwinned Copper Combined with Silicon/Silicon Nitride/Graphite Anode for High-Performance Lithium-Ion Battery. Materials, 19(12), 2496. https://doi.org/10.3390/ma19122496

Vancouver

Chen FC, Hernandha RFH, Tran DP, Chang JK, Chen C. High-Strength Nanotwinned Copper Combined with Silicon/Silicon Nitride/Graphite Anode for High-Performance Lithium-Ion Battery. Materials. 2026;19(12):2496. doi:10.3390/ma19122496

BibTeX
@article{Chen2026,
  author = {Chen, Fu-Chian and Hernandha, Rahmandhika Firdauzha Hary and Tran, Dinh-Phuc and Chang, Jeng-Kuei and Chen, Chih},
  title = {High-Strength Nanotwinned Copper Combined with Silicon/Silicon Nitride/Graphite Anode for High-Performance Lithium-Ion Battery},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2496},
  doi = {10.3390/ma19122496}
}
Kostenlos starten →