EUVIMEDEUVIMED entdecken
Crossref

Regeneration of photovoltaic industry silicon waste toward high‐performance lithium‐ion battery anode

Kai Wang, Xiao‐Bin Zhong, Yue‐Xian Song, Yao‐Hui Zhang, Yan‐Gang Zhang, Xiao‐Gang You, Pu‐Guang Ji, Kurbanov Mirtemir Shodievich, Umedjon Khalilov, Gong‐Kai Wang, Xin Zhang, Xing‐Liang Yao und 3 weitere

Rare Metals · 2024-10 · 43 (10) · 4948-4960

DOI: 10.1007/s12598-024-02783-w ↗

Kurz gefasst

Fachartikel in der Zeitschrift Rare Metals, online erschienen am 06.06.2024. Verfasst von Kai Wang und 14 weiteren Autor:innen. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 44 Literaturangaben. Gefördert von: National Natural Science Foundation of China, International Cooperation Project of National Key Research and Development Program of China, The Project of Zhongyuan Critical Metals Laboratory.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The diamond‐wire sawing silicon waste (DWSSW) from the photovoltaic industry has been widely considered as a low‐cost raw material for lithium‐ion battery silicon‐based electrode, but the effect mechanism of impurities presents in DWSSW on lithium storage performance is still not well understood; meanwhile, it is urgent to develop a strategy for changing DWSSW particles into high‐performance electrode materials. In this work, the occurrence state of impurities presents in DWSSW was carefully analyzed using in situ Ar ion etching technology. Then, the novel Si@C@SiO x @PAl‐N–C composite was designed through in situ encapsulation strategy. The obtained Si@C@SiO x @PAl‐N–C electrode shows a high first capacity of 2343.4 mAh·g −1 with an initial Coulombic efficiency (ICE) of 84.4% under current density of 1.0 A·g −1 , and can deliver an impressive capacity of 984.9 mAh·g −1 after 200 cycles. Combined numerical simulation modeling calculations, the increase in proportion of Si 4+ /Si 0 and Si 3+ /Si 0 valence states in SiO x layer leads to a decrease in von Mises stress, which ultimately improves the cycling structural stability. Meanwhile, the porous 2D–3D aluminum/nitrogen (Al/N) co‐doped carbon layer and nanowires on SiO x layer can provide abundant active sites for lithium storage due to its developed hierarchical pores structure, which facilitates ion transport. What is more, the performance of Si@C@SiO x @PAl‐N–C//LiFePO 4 full cell shows its great potential in practical application.

Förderung

  • National Natural Science Foundation of China
  • International Cooperation Project of National Key Research and Development Program of China
  • The Project of Zhongyuan Critical Metals Laboratory
  • National Science Foundation of Shanxi Province
  • Fundamental Research Program of Shanxi Province

Zitieren

APA

Wang, K., Zhong, X., Song, Y., Zhang, Y., Zhang, Y., You, X., Ji, P., Shodievich, K. M., Khalilov, U., Wang, G., Zhang, X., Yao, X., Li, F., Liang, J., & Wang, H. (2024). Regeneration of photovoltaic industry silicon waste toward high‐performance lithium‐ion battery anode. Rare Metals, 43(10), 4948-4960. https://doi.org/10.1007/s12598-024-02783-w

Vancouver

Wang K, Zhong X, Song Y, Zhang Y, Zhang Y, You X, et al. Regeneration of photovoltaic industry silicon waste toward high‐performance lithium‐ion battery anode. Rare Metals. 2024;43(10):4948-4960. doi:10.1007/s12598-024-02783-w

BibTeX
@article{Wang2024,
  author = {Wang, Kai and Zhong, Xiao‐Bin and Song, Yue‐Xian and Zhang, Yao‐Hui and Zhang, Yan‐Gang and You, Xiao‐Gang and Ji, Pu‐Guang and Shodievich, Kurbanov Mirtemir and Khalilov, Umedjon and Wang, Gong‐Kai and Zhang, Xin and Yao, Xing‐Liang and Li, Feng and Liang, Jun‐Fei and Wang, Hua},
  title = {Regeneration of photovoltaic industry silicon waste toward high‐performance lithium‐ion battery anode},
  journal = {Rare Metals},
  year = {2024},
  volume = {43},
  number = {10},
  pages = {4948--4960},
  doi = {10.1007/s12598-024-02783-w}
}
Kostenlos starten →