Improvement in Thermal Conductivity in UV-Curable Polymer Composites via h-BN and Graphite Hybrid Fillers for DLP 3D Printing
Materials · 29.05.2026 · 19 (11) · 2304
DOI: 10.3390/ma19112304 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 29.05.2026. Verfasst von Marco Fortunato und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Sustainability, Circularity, and Climate Change Adaptation of Production and Territorial Systems (SSPT), Research Centre of Casaccia, I…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: MASE.
Abstract (Originalsprache)
UV-curable polymer composites are attractive for fabricating complex components by digital light processing (DLP), but improving thermal transport while preserving printability remains challenging at high filler loadings. In this work, solvent-free UV-curable formulations filled with hexagonal boron nitride (h-BN) and h-BN/graphite hybrids were developed for DLP 3D printing using commercially available equipment. The effects of filler composition on viscosity, printability, microstructure, through-thickness thermal conductivity, electrical conductivity, and tensile behavior were investigated. Viscosity increased markedly with filler loading, yet reliable DLP printing was achieved up to 40 wt% h-BN through composition-dependent adjustment of build parameters. Thermal analysis supported negligible macroscopic sedimentation during printing, while optical and FE-SEM observations revealed generally uniform platelet dispersion, visible 50 μm layer stratification, and limited phase segregation in the hybrid systems. The through-thickness thermal conductivity increased from ~0.25 W/mK for the neat resin to ~1.95 W/mK at 40 wt% h-BN. At a fixed 20 wt% h-BN, graphite addition led to a smaller increase in thermal conductivity, up to ~1.16 W/mK, while increasing electrical conductivity and reducing mechanical performance. A phenomenological percolation-type model captured the thermal-conductivity trend of the h-BN series. Overall, h-BN-rich formulations provided the most effective route to enhance thermal conductivity while preserving electrical insulation.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Sustainability, Circularity, and Climate Change Adaptation of Production and Territorial Systems (SSPT), Research Centre of Casaccia, Italian National Agency for New Technologies, Energy and Sustainable Ec…
ORCID-Profile: Marco Fortunato, Alessandra Fava
Förderung
- MASE
Zitieren
APA
Fortunato, M., Stifani, C., Fava, A., Mancini, M. R., De Angelis, U., De Santis, G., Corallo, G., & Mirabile Gattia, D. (2026). Improvement in Thermal Conductivity in UV-Curable Polymer Composites via h-BN and Graphite Hybrid Fillers for DLP 3D Printing. Materials, 19(11), 2304. https://doi.org/10.3390/ma19112304
Vancouver
Fortunato M, Stifani C, Fava A, Mancini MR, De Angelis U, De Santis G, et al. Improvement in Thermal Conductivity in UV-Curable Polymer Composites via h-BN and Graphite Hybrid Fillers for DLP 3D Printing. Materials. 2026;19(11):2304. doi:10.3390/ma19112304
BibTeX
@article{Fortunato2026,
author = {Fortunato, Marco and Stifani, Cristina and Fava, Alessandra and Mancini, Maria Rita and De Angelis, Ugo and De Santis, Giuseppe and Corallo, Giuseppe and Mirabile Gattia, Daniele},
title = {Improvement in Thermal Conductivity in UV-Curable Polymer Composites via h-BN and Graphite Hybrid Fillers for DLP 3D Printing},
journal = {Materials},
year = {2026},
volume = {19},
number = {11},
pages = {2304},
doi = {10.3390/ma19112304}
}
EUVIMED