EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Innovative Polymer Composites with Natural Fillers Produced by Additive Manufacturing (3D Printing)—A Literature Review

Beata Anwajler iD, Ewa Zdybel iD, Ewa Tomaszewska-Ciosk iD

Polymers · 24.08.2023 · 15 (17) · 3534

DOI: 10.3390/polym15173534 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 24.08.2023. Verfasst von Beata Anwajler und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical and Power Engineering, Wroclaw University of Science and Technology, 27 Wybrzeze Wyspianskiego Street, 50-370 Wroclaw, Poland. Die Arbeit wurde bisher 63-mal zitiert (Crossref) und nennt 109 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Wroclaw University of Environmental and Life Sciences.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent years, plastics recycling has become one of the leading environmental and waste management issues. Along with the main advantage of plastics, which is undoubtedly their long life, the problem of managing their waste has arisen. Recycling is recognised as the preferred option for waste management, with the aim of reusing them to create new products using 3D printing. Additive manufacturing (AM) is an emerging and evolving rapid tooling technology. With 3D printing, it is possible to achieve lightweight structures with high dimensional accuracy and reduce manufacturing costs for non-standard geometries. Currently, 3D printing research is moving towards the production of materials not only of pure polymers but also their composites. Bioplastics, especially those that are biodegradable and compostable, have emerged as an alternative for human development. This article provides a brief overview of the possibilities of using thermoplastic waste materials through the application of 3D printing, creating innovative materials from recycled and naturally derived materials, i.e., biomass (natural reinforcing fibres) in 3D printing. The materials produced from them are ecological, widely available and cost-effective. Research activities related to the production of bio-based materials have gradually increased over the last two decades, with the aim of reducing environmental problems. This article summarises the efforts made by researchers to discover new innovative materials for 3D printing.

Schlagwörter

Stichwörter der Autor:innen

3D printingTPSbiocompositesbiofibresbiomassnatural fillers

Autor:innen und Institutionen

  • Faculty of Mechanical and Power Engineering, Wroclaw University of Science and Technology, 27 Wybrzeze Wyspianskiego Street, 50-370 Wroclaw, Poland.
  • Department of Food Storage and Technology, Wroclaw University of Environmental and Life Sciences, 25 Norwida Street, 50-375 Wroclaw, Poland.

ORCID-Profile: Beata Anwajler, Ewa Zdybel, Ewa Tomaszewska-Ciosk

Förderung

  • Wroclaw University of Environmental and Life Sciences

Zitieren

APA

Anwajler, B., Zdybel, E., & Tomaszewska-Ciosk, E. (2023). Innovative Polymer Composites with Natural Fillers Produced by Additive Manufacturing (3D Printing)—A Literature Review. Polymers, 15(17), 3534. https://doi.org/10.3390/polym15173534

Vancouver

Anwajler B, Zdybel E, Tomaszewska-Ciosk E. Innovative Polymer Composites with Natural Fillers Produced by Additive Manufacturing (3D Printing)—A Literature Review. Polymers. 2023;15(17):3534. doi:10.3390/polym15173534

BibTeX
@article{Anwajler2023,
  author = {Anwajler, Beata and Zdybel, Ewa and Tomaszewska-Ciosk, Ewa},
  title = {Innovative Polymer Composites with Natural Fillers Produced by Additive Manufacturing (3D Printing)—A Literature Review},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {17},
  pages = {3534},
  doi = {10.3390/polym15173534}
}
Kostenlos starten →