Fatigue Failure Mechanism and Crack Growth Behavior of Ti-6Al-4V ELI Titanium Alloy Welded Joints
Materials · 29.05.2026 · 19 (11) · 2301
DOI: 10.3390/ma19112301 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 29.05.2026. Verfasst von Jiajun Liu und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering Science, University of Chinese Academy of Sciences, Beijing 100049, China. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Major Special Projects, China, Strategic Priority Research Program of Chinese Academy of Sciences, National Science and Technology Major Project.
Abstract (Originalsprache)
Titanium alloy welded joints are key parts of deep-sea pressure hulls, which are subjected to fatigue loadings in service. In this study, axial fatigue tests, mode I fatigue crack growth tests, and mixed-mode I–II fatigue crack growth tests were conducted on the Ti-6Al-4V ELI titanium alloy welded joint, and its fatigue failure mechanism and crack growth behavior is investigated and compared with the base material. The results show that the S–N curve of Ti-6Al-4V ELI titanium alloy welded joints has a very similar slope as the base material, but its fatigue performance is lower than the base material. However, the welded joints exhibit a higher resistance in the near-threshold region under mode I loading compared to the base material. Scanning electron microscope observation indicates that the fatigue crack mainly initiates from gas pores during welding for the Ti-6Al-4V ELI titanium alloy welded joints. Under mixed-mode I–II loading, the stress intensity factor range component ΔKI of welded joints is higher than that of the base material, and an equivalent stress intensity factor range model is proposed to describe the crack growth rate under both mode I and mixed-mode I–II loadings. The new model incorporates a parameter dependent on the mode mixity ratio defined by ΔKII/ΔKI in this paper, and it unifies the crack growth data well under mode I and mixed-mode I–II loadings. The paper indicates that the gas pores during welding are an important factor for the poor fatigue performance of Ti-6Al-4V ELI titanium alloy welded joints.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Engineering Science, University of Chinese Academy of Sciences, Beijing 100049, China.
- State Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, China.
- China Ship Scientific Research Center, Wuxi 214082, China.
ORCID-Profile: Chengqi Sun
Förderung
- National Major Special Projects, China
- Strategic Priority Research Program of Chinese Academy of Sciences
- National Science and Technology Major Project
Zitieren
APA
Liu, J., Li, Y., Rui, S. S., Chen, W., & Sun, C. (2026). Fatigue Failure Mechanism and Crack Growth Behavior of Ti-6Al-4V ELI Titanium Alloy Welded Joints. Materials, 19(11), 2301. https://doi.org/10.3390/ma19112301
Vancouver
Liu J, Li Y, Rui SS, Chen W, Sun C. Fatigue Failure Mechanism and Crack Growth Behavior of Ti-6Al-4V ELI Titanium Alloy Welded Joints. Materials. 2026;19(11):2301. doi:10.3390/ma19112301
BibTeX
@article{Liu2026,
author = {Liu, Jiajun and Li, Yu and Rui, Shao-Shi and Chen, Wei and Sun, Chengqi},
title = {Fatigue Failure Mechanism and Crack Growth Behavior of Ti-6Al-4V ELI Titanium Alloy Welded Joints},
journal = {Materials},
year = {2026},
volume = {19},
number = {11},
pages = {2301},
doi = {10.3390/ma19112301}
}
EUVIMED