EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Stress Corrosion Cracking of Ti-6Al-4V ELI Titanium Alloy in 3.5 wt.% NaCl Solution

Qing Zhao, Aifeng Zhang, Zhengquan Wan, Yafei Wang iD, Chengqi Sun iD

Materials · 23.08.2026 · 19 (17) · 3572

DOI: 10.3390/ma19173572 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 23.08.2026. Verfasst von Qing Zhao und 4 weiteren Autor:innen. Beteiligte Einrichtung: China Ship Scientific Research Center, Wuxi 214082, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Stabilization Support Research Project of CSSRC.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ti-6Al-4V titanium alloy is extensively employed in deep-sea structural applications owing to its excellent corrosion resistance, while its extra-low-interstitial (ELI) variant provides higher fracture toughness and is commonly presumed to exhibit even better stress corrosion cracking (SCC) resistance. In this work, displacement-rate-dependent fracture toughness (KQ) measurements and failure analysis were performed for compact tension specimens machined from an engineering Ti-6Al-4V ELI plate with different orientations, tested in air and 3.5 wt.% NaCl solution over displacement rates of 0.0012–1.2 mm/min. In air, KQ exhibits a pronounced loading-rate dependence, decreasing by more than 20% at low displacement rates relative to maximum rate, accompanied by quasi-cleavage features on the fracture surfaces indicative of hydrogen-assisted damage, likely arising from environmental or processing-related hydrogen uptake. In 3.5 wt.% NaCl solution, the minimum KQ within the low-rate regime (0.0012–0.12 mm/min) is 58 MPa·m0.5, comparable to values reported for conventional Ti-6Al-4V under similar conditions. The pronounced rate dependence and transition toward cleavage-like fracture reveal a strong coupling between loading kinetics and environmental degradation. This work demonstrates that enhanced intrinsic toughness does not necessarily translate into superior SCC resistance and establishes loading rate as a critical factor governing the environmental fracture of Ti-6Al-4V ELI under marine conditions.

Schlagwörter

Stichwörter der Autor:innen

corrosive environmentfracture toughnessstress corrosion crackingtitanium alloy

Autor:innen und Institutionen

  • China Ship Scientific Research Center, Wuxi 214082, China.
  • Taihu Laboratory of Deepsea Technological Science, Wuxi 214082, China.
  • Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, China.
  • School of Engineering Science, University of Chinese Academy of Sciences; Beijing 100049, China.

ORCID-Profile: Yafei Wang, Chengqi Sun

Förderung

  • Stabilization Support Research Project of CSSRC

Zitieren

APA

Zhao, Q., Zhang, A., Wan, Z., Wang, Y., & Sun, C. (2026). Stress Corrosion Cracking of Ti-6Al-4V ELI Titanium Alloy in 3.5 wt.% NaCl Solution. Materials, 19(17), 3572. https://doi.org/10.3390/ma19173572

Vancouver

Zhao Q, Zhang A, Wan Z, Wang Y, Sun C. Stress Corrosion Cracking of Ti-6Al-4V ELI Titanium Alloy in 3.5 wt.% NaCl Solution. Materials. 2026;19(17):3572. doi:10.3390/ma19173572

BibTeX
@article{Zhao2026,
  author = {Zhao, Qing and Zhang, Aifeng and Wan, Zhengquan and Wang, Yafei and Sun, Chengqi},
  title = {Stress Corrosion Cracking of Ti-6Al-4V ELI Titanium Alloy in 3.5 wt.% NaCl Solution},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {17},
  pages = {3572},
  doi = {10.3390/ma19173572}
}
Kostenlos starten →