EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigating Process–Structure–Property Relationships in Large-Scale Additively Manufactured Carbon-Filled PETg

Christopher Bock iD, Brett Ellis iD, Masoud Rais-Rohani iD

Materials · 27.05.2026 · 19 (11) · 2270

DOI: 10.3390/ma19112270 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 27.05.2026. Verfasst von Christopher Bock und 2 weiteren Autor:innen. Beteiligte Einrichtung: Advanced Structures and Composites Center, University of Maine, 35 Flagstaff Road, Orono, ME 04469, USA. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: U.S. Army Engineer Research and Development Center.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Properties of a material fabricated by large-scale additive manufacturing exhibit strong process dependence by way of processing and microstructure. This study seeks to experimentally evaluate this process–structure–property linkage for carbon-fiber-reinforced PETg. To facilitate this investigation, an experimental design involving eight different combinations of layer height, feed rate, bead spacing and screw speed in the printing process is considered. Forty-five microstructure specimens are excised and imaged to reveal the fiber orientation and porosity, and nearly 180 flexural samples are tested to evaluate their strength and stiffness. Measured mean values for modulus along the bead range from 13.3 to 18.6 GPa, and for strength, it is between 158 to 189 MPa. Mean values for the inter-layer stiffness range from 2.9 to 3.2 GPa, and for strength, it ranges between 31.4 and 45.0 MPa. Results indicate a strong relationship between screw speed and fiber orientation and between fiber orientation and stiffness and strength. Additional insights into the fracture behavior of the material are provided using high-speed photography of the moment of fracture and microscopy of the fracture surfaces. This work provides a cohesive process–structure–property dataset that can be used as a reference for validation of process–structure, structure–property, and process–structure–property models.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingextrusion-based additive manufacturingmechanical propertiesmicrostructurethermoplastic composites

Autor:innen und Institutionen

  • Advanced Structures and Composites Center, University of Maine, 35 Flagstaff Road, Orono, ME 04469, USA.
  • Department of Mechanical Engineering, University of Maine, 75 Long Road, Orono, ME 04469, USA.
  • Department of Mechanical Engineering Technology, University of Maine, 5711 Boardman Hall, Orono, ME 04469, USA.

ORCID-Profile: Christopher Bock, Brett Ellis, Masoud Rais-Rohani

Förderung

  • U.S. Army Engineer Research and Development Center

Zitieren

APA

Bock, C., Ellis, B., & Rais-Rohani, M. (2026). Investigating Process–Structure–Property Relationships in Large-Scale Additively Manufactured Carbon-Filled PETg. Materials, 19(11), 2270. https://doi.org/10.3390/ma19112270

Vancouver

Bock C, Ellis B, Rais-Rohani M. Investigating Process–Structure–Property Relationships in Large-Scale Additively Manufactured Carbon-Filled PETg. Materials. 2026;19(11):2270. doi:10.3390/ma19112270

BibTeX
@article{Bock2026,
  author = {Bock, Christopher and Ellis, Brett and Rais-Rohani, Masoud},
  title = {Investigating Process–Structure–Property Relationships in Large-Scale Additively Manufactured Carbon-Filled PETg},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {11},
  pages = {2270},
  doi = {10.3390/ma19112270}
}
Kostenlos starten →