EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electrospark Deposition and Ultrasonic Peening Treatment on AlSi10Mg Powder Bed Fusion–Laser Beam Parts: Microstructure and Properties

Paola Leo iD, Gilda Renna, Andrea Amleto De Luca, Riccardo Nobile iD, Caterina Casavola, Vincenzo Moramarco iD, Simone Carone iD, Michele Angelo Attolico iD

Materials · 13.05.2026 · 19 (10) · 2041

DOI: 10.3390/ma19102041 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 13.05.2026. Verfasst von Paola Leo und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering for Innovation, University of Salento, Via per Monteroni, 73100 Lecce, Italy. Die Arbeit nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministero dell'università e della ricerca, Italian Ministry of University and Research.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM) has revolutionized industrial production. However, the repair of AM components remains a critical challenge due to their unique microstructural features. While repair approaches for conventionally manufactured alloys are well established, their direct transferability to AM parts remains largely unexplored due to the unique thermal history and anisotropic microstructure of additive components. This study investigates a novel repair and improvement strategy for Powder Bed Fusion–Laser Beam/Metal (PBF-LB/M)-fabricated AlSi10Mg components, combining Electrospark Deposition (ESD) for dimensional restoration with subsequent Ultrasonic Peening Treatment (UPT) for surface enhancement. Microstructure, porosity, surface roughness, hardness profiles, residual stresses, and corrosion behaviour were systematically characterized using SEM, optical microscopy, profilometry, Vickers microhardness testing, XRD, and electrochemical polarization tests. The results show that the ESD process is capable of producing coatings with excellent interfacial adhesion to the substrate, with an initial porosity of 3.6 ± 0.5%. The subsequent UPT induces a significant densification effect on the deposited material, reducing porosity by approximately 50% and increasing surface hardness by up to 48% in the upper region of the coating. Furthermore, XRD analysis reveals that UPT completely reverses the residual stress state from tensile (typical of the ESD process) to compressive in all measured directions, thereby improving the overall structural integrity. Ultimately, the combined ESD + UPT alters the electrochemical response of AlSi10Mg deposits, resulting in a nobler corrosion potential, albeit with a slightly higher corrosion current density.

Schlagwörter

Stichwörter der Autor:innen

AlSi10MgElectrospark Depositionadditive manufacturingcorrosiondefectsmicrostructurepropertiesultrasonic peening treatment

Autor:innen und Institutionen

  • Department of Engineering for Innovation, University of Salento, Via per Monteroni, 73100 Lecce, Italy.
  • Dipartimento di Meccanica, Matematica e Management, Via Orabona 4, 70125 Bari, Italy.

ORCID-Profile: Paola Leo, Riccardo Nobile, Vincenzo Moramarco, Simone Carone, Michele Angelo Attolico

Förderung

  • Ministero dell'università e della ricerca
  • Italian Ministry of University and Research

Zitieren

APA

Leo, P., Renna, G., De Luca, A. A., Nobile, R., Casavola, C., Moramarco, V., Carone, S., & Attolico, M. A. (2026). Electrospark Deposition and Ultrasonic Peening Treatment on AlSi10Mg Powder Bed Fusion–Laser Beam Parts: Microstructure and Properties. Materials, 19(10), 2041. https://doi.org/10.3390/ma19102041

Vancouver

Leo P, Renna G, De Luca AA, Nobile R, Casavola C, Moramarco V, et al. Electrospark Deposition and Ultrasonic Peening Treatment on AlSi10Mg Powder Bed Fusion–Laser Beam Parts: Microstructure and Properties. Materials. 2026;19(10):2041. doi:10.3390/ma19102041

BibTeX
@article{Leo2026,
  author = {Leo, Paola and Renna, Gilda and De Luca, Andrea Amleto and Nobile, Riccardo and Casavola, Caterina and Moramarco, Vincenzo and Carone, Simone and Attolico, Michele Angelo},
  title = {Electrospark Deposition and Ultrasonic Peening Treatment on AlSi10Mg Powder Bed Fusion–Laser Beam Parts: Microstructure and Properties},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {10},
  pages = {2041},
  doi = {10.3390/ma19102041}
}
Kostenlos starten →