EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multipass Friction Stir Processing of Laser-Powder Bed Fusion AlSi10Mg: Microstructure and Mechanical Properties

Akbar Heidarzadeh iD, Mahsa Khorshidi, Roghayeh Mohammadzadeh, Rasoul Khajeh iD, Mohammadreza Mofarrehi, Mousa Javidani iD, X-Grant Chen iD

Materials · 13.02.2023 · 16 (4) · 1559

DOI: 10.3390/ma16041559 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 13.02.2023. Verfasst von Akbar Heidarzadeh und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Engineering, Azarbaijan Shahid Madani University, Tabriz P.O. Box 53714-161, Iran. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada (NSERC).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effect of multipass friction stir processing (FSP) on the microstructure and mechanical properties of an AlSi10Mg alloy produced by laser-powder bed fusion was investigated. FSP was performed at a rotational speed of 950 rpm and traverse speed of 85 mm/min. The results indicated that FSP destroyed the coarse grain structure in the as-built AlSi10Mg by generating fine and equiaxed grain structures with shear texture components of A1*(111)[1¯1¯2] and A2*(111)[112¯], in addition to causing fragmentation and refinement of the Si networks. FSP reduced the tensile strength slightly but significantly improved ductility. One-pass FSP exhibited superior mechanical properties compared with the two- and three-pass scenarios. The higher strength of the one-pass sample was attributed to the strengthening mechanisms induced by the Si particles, which were grown by repeated FSP. The higher ductility of the one-pass sample was explained using the kernel and grain average misorientations. Furthermore, the post-FSP microstructural evolution and fracture behavior of the samples were discussed.

Schlagwörter

Stichwörter der Autor:innen

AlSi10Mg alloyfriction stir processinglaser-powder bed fusionmechanical propertiesmicrostructure

Autor:innen und Institutionen

  • Department of Materials Engineering, Azarbaijan Shahid Madani University, Tabriz P.O. Box 53714-161, Iran.
  • School of Metallurgy and Materials Engineering, Iran University of Science and Technology, Tehran P.O. Box 16846-13114, Iran.
  • Department of Applied Science, University of Quebec at Chicoutimi, Saguenay, QC G7H 2B1, Canada.

ORCID-Profile: Akbar Heidarzadeh, Rasoul Khajeh, Mousa Javidani, X-Grant Chen

Förderung

  • Natural Sciences and Engineering Research Council of Canada (NSERC)

Zitieren

APA

Heidarzadeh, A., Khorshidi, M., Mohammadzadeh, R., Khajeh, R., Mofarrehi, M., Javidani, M., & Chen, X. G. (2023). Multipass Friction Stir Processing of Laser-Powder Bed Fusion AlSi10Mg: Microstructure and Mechanical Properties. Materials, 16(4), 1559. https://doi.org/10.3390/ma16041559

Vancouver

Heidarzadeh A, Khorshidi M, Mohammadzadeh R, Khajeh R, Mofarrehi M, Javidani M, et al. Multipass Friction Stir Processing of Laser-Powder Bed Fusion AlSi10Mg: Microstructure and Mechanical Properties. Materials. 2023;16(4):1559. doi:10.3390/ma16041559

BibTeX
@article{Heidarzadeh2023,
  author = {Heidarzadeh, Akbar and Khorshidi, Mahsa and Mohammadzadeh, Roghayeh and Khajeh, Rasoul and Mofarrehi, Mohammadreza and Javidani, Mousa and Chen, X-Grant},
  title = {Multipass Friction Stir Processing of Laser-Powder Bed Fusion AlSi10Mg: Microstructure and Mechanical Properties},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {4},
  pages = {1559},
  doi = {10.3390/ma16041559}
}
Kostenlos starten →