EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Warm-Mix Agents on the Thermal Stability of SBS-Modified Asphalt

Qingdong Tao, Tianhong Xia, Desheng Yang, Hao Xiang iD, Ruizhe Si

Materials · 10.05.2026 · 19 (10) · 1970

DOI: 10.3390/ma19101970 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.05.2026. Verfasst von Qingdong Tao und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Architectural Engineering, Mianyang Polytechnic, Mianyang 621000, China. Die Arbeit nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Project of Mianyang Polytechnic, National & Local Joint Engineering Research Center of Transportation and Civil Engineering Materials, Chongqing Jiaotong University, Natural Science Foundation Project of Sichuan Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To evaluate the susceptibility of styrene–butadiene–styrene (SBS)-modified asphalt to modifier segregation during high-temperature storage, this study examined its segregation behavior and microstructural evolution under storage conditions ranging from 70 to 163 °C over durations of 48–144 h, with varying warm-mix agent dosages (0%, 3%, 4%, and 5%). The investigation was conducted using softening point measurements, dynamic shear rheometry, infrared spectroscopy, and optical microscopy. The results indicated that the incorporation of the warm-mix agent significantly reduced the difference in softening point, diminished the discrepancies in complex modulus and phase angle between the upper and lower layers, and inhibited SBS aggregation and phase separation. When the warm-mix agent content reached 5%, the softening point difference in the modified asphalt at 163 °C and 48 h decreased from 14.4 °C to 1.6 °C, essentially eliminating segregation. Infrared spectroscopy confirmed that the warm-mix agent did not induce chemical bond changes but improved the compatibility between the SBS modifier and the base asphalt. Microscopic observation further verified that the warm-mix agent facilitated a uniform dispersion of SBS modifier particles, forming a stable microphase structure. The research findings provide valuable insights for improving the storage stability and engineering performance of SBS-modified asphalt.

Schlagwörter

Stichwörter der Autor:innen

SBS-modified asphaltdynamic shear rheologymicrostructurethermal stabilitywarm-mix agent

Autor:innen und Institutionen

  • School of Architectural Engineering, Mianyang Polytechnic, Mianyang 621000, China.
  • National & Local Joint Engineering Research Center of Transportation and Civil Engineering Materials, Chongqing Jiaotong University, Chongqing 400074, China.
  • Shock and Vibration of Engineering Materials and Structures Key Laboratory of Sichuan Province, Southwest University of Science and Technology, Mianyang 621010, China.
  • College of Civil Engineering, Southwest Jiaotong University, Chengdu 610031, China.

ORCID-Profile: Hao Xiang

Förderung

  • The Project of Mianyang Polytechnic
  • National & Local Joint Engineering Research Center of Transportation and Civil Engineering Materials, Chongqing Jiaotong University
  • Natural Science Foundation Project of Sichuan Province
  • Central Guidance for Local Science and Technology Development Fund Project
  • National & Local Joint Engineering Research Center of Transportation and Civil Engineering Materials, Chongqing Jiaotong University

Zitieren

APA

Tao, Q., Xia, T., Yang, D., Xiang, H., & Si, R. (2026). Effects of Warm-Mix Agents on the Thermal Stability of SBS-Modified Asphalt. Materials, 19(10), 1970. https://doi.org/10.3390/ma19101970

Vancouver

Tao Q, Xia T, Yang D, Xiang H, Si R. Effects of Warm-Mix Agents on the Thermal Stability of SBS-Modified Asphalt. Materials. 2026;19(10):1970. doi:10.3390/ma19101970

BibTeX
@article{Tao2026,
  author = {Tao, Qingdong and Xia, Tianhong and Yang, Desheng and Xiang, Hao and Si, Ruizhe},
  title = {Effects of Warm-Mix Agents on the Thermal Stability of SBS-Modified Asphalt},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {10},
  pages = {1970},
  doi = {10.3390/ma19101970}
}
Kostenlos starten →