EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Performance Evaluation of Warm-Mix Agents on Crumb Rubber-Modified Asphalt

Bo Huang, Song Xu iD, Shishui Liulin, Xiangjie Niu, Jihong Zhou, Xiong Xu iD

Materials · 01.06.2026 · 19 (11) · 2333

DOI: 10.3390/ma19112333 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 01.06.2026. Verfasst von Bo Huang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Fujian Transportation Development High-Tech Co., Ltd., Fuzhou 350004, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Research and Development Program Project of Fujian Provincial Department of Housing and Urban-Rural Development, National Natural Science Foundation of China, Science and Technology Research and Development Program Project of the Fujian Provincial Department of Housing and Urban–Rural Development.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To achieve warm-mix production of crumb rubber-modified asphalt (CRA), an organic warm-mix agent, a surfactant-based warm-mix agent, and a composite warm-mix agent were employed to prepare warm-mix CRA. The effects of warm-mix agents on the physical properties of CRA were evaluated using the penetration test, softening point test, viscosity test, ductility test, and elastic recovery test. The effects of warm-mix agents on the high- and low-temperature rheological properties were investigated through dynamic shear rheometer (DSR), multiple stress creep recovery (MSCR), and bending beam rheometer (BBR) tests. Moreover, the viscosity–temperature characteristics and the VOC emissions of different warm-mix CRAs were explored. The results show that Sasobit, an organic warm-mix agent, increases the elastic fraction and stiffness of CRA, which enhances its high-temperature resistance to permanent deformation but compromises its low-temperature cracking resistance. UWM, a surfactant-based warm-mix agent, elevates the viscous fraction and flexibility of CRA, which improves its low-temperature cracking resistance but weakens its high-temperature rutting resistance. The composite warm-mix agent, consisting of 2 wt.% Sasobit and 5 wt.% UWM, can balance the stiffness and flexibility of CRA, endowing CRA with satisfactory pavement performance. All three warm-mix agents effectively reduce the viscosity, mixing temperature, and VOC emissions of CRA. The composite warm-mix agent reduces the VOC emissions of CRA by 53.0%, exhibiting the most pronounced reduction.

Schlagwörter

Stichwörter der Autor:innen

crumb rubber-modified asphaltperformance evaluationrheological propertieswarm-mix agentswarm-mix technology

Autor:innen und Institutionen

  • Fujian Transportation Development High-Tech Co., Ltd., Fuzhou 350004, China.
  • College of Civil Engineering, Fuzhou University, Fuzhou 350108, China.
  • School of Civil Engineering and Architecture, Wuhan Institute of Technology, Wuhan 430073, China.

ORCID-Profile: Song Xu, Xiong Xu

Förderung

  • Science and Technology Research and Development Program Project of Fujian Provincial Department of Housing and Urban-Rural Development
  • National Natural Science Foundation of China
  • Science and Technology Research and Development Program Project of the Fujian Provincial Department of Housing and Urban–Rural Development

Zitieren

APA

Huang, B., Xu, S., Liulin, S., Niu, X., Zhou, J., & Xu, X. (2026). Performance Evaluation of Warm-Mix Agents on Crumb Rubber-Modified Asphalt. Materials, 19(11), 2333. https://doi.org/10.3390/ma19112333

Vancouver

Huang B, Xu S, Liulin S, Niu X, Zhou J, Xu X. Performance Evaluation of Warm-Mix Agents on Crumb Rubber-Modified Asphalt. Materials. 2026;19(11):2333. doi:10.3390/ma19112333

BibTeX
@article{Huang2026,
  author = {Huang, Bo and Xu, Song and Liulin, Shishui and Niu, Xiangjie and Zhou, Jihong and Xu, Xiong},
  title = {Performance Evaluation of Warm-Mix Agents on Crumb Rubber-Modified Asphalt},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {11},
  pages = {2333},
  doi = {10.3390/ma19112333}
}
Kostenlos starten →