Effect of Tempering Temperature on Microstructural Evolution and Mechanical Properties of Cr-Ni-Mo-V Steel for Pressure Vessel Applications
Materials · 22.04.2026 · 19 (9) · 1679
DOI: 10.3390/ma19091679 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 22.04.2026. Verfasst von Enpu Liang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Research Institute for Special Steels, Central Iron and Steel Research Institute Co., Ltd. (CISRI), Beijing 100081, China. Die Arbeit nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Institute for Special Steels, Central Iron and Steel Research Institute Co., Ltd..
Abstract (Originalsprache)
This study investigates the effects of tempering temperature on the microstructural evolution and mechanical properties of Cr-Ni-Mo-V steel designed for pressure vessel applications. The microstructure was characterized via scanning electron microscopy (SEM), transmission electron microscopy (TEM, Thermo Fisher Talos F200X), electron backscatter diffraction (EBSD), and physicochemical phase analysis. Mechanical performance was evaluated through tensile and impact tests, followed by a detailed discussion of the underlying strengthening mechanisms. The results demonstrate that the microstructure after tempering is fully tempered martensite. Samples tempered between 425 °C and 525 °C exhibit significant tempering resistance, maintaining a tensile strength of approximately 1300 MPa. This is primarily attributed to the synergistic effect of dislocation strengthening and the precipitation of MC-type carbides. As the tempering temperature increases to 625 °C, the dislocation density decreases sharply from 3.71 × 1011 cm−2 to 1.18 × 1011 cm−2, leading to a decline in strength. Concurrently, the impact energy increases significantly from 71 J to 132 J. The improvement in toughness is mainly attributed to the significant elevation of the crack initiation threshold, which is dominated by the reduction in matrix dislocation density, the coarsening and spheroidization of carbides, and the alleviation of local stress concentration. The relative proportion of high-angle grain boundaries (HAGBs, misorientation > 15°) increases from 51.9% to 57.7% during tempering, which is a result of the massive elimination of low-angle grain boundaries rather than an increase in the absolute length per unit area of HAGBs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Research Institute for Special Steels, Central Iron and Steel Research Institute Co., Ltd. (CISRI), Beijing 100081, China.
- Fushun Special Steel Co., Ltd., Fushun 113000, China.
- Chongqing Changan Wangjiang Industrial Group Co., Ltd., Chongqing 404135, China.
Förderung
- Research Institute for Special Steels, Central Iron and Steel Research Institute Co., Ltd.
Zitieren
APA
Liang, E., Liang, X., Yang, Y., Yu, W., Xu, L., Wang, M., & Shi, J. (2026). Effect of Tempering Temperature on Microstructural Evolution and Mechanical Properties of Cr-Ni-Mo-V Steel for Pressure Vessel Applications. Materials, 19(9), 1679. https://doi.org/10.3390/ma19091679
Vancouver
Liang E, Liang X, Yang Y, Yu W, Xu L, Wang M, et al. Effect of Tempering Temperature on Microstructural Evolution and Mechanical Properties of Cr-Ni-Mo-V Steel for Pressure Vessel Applications. Materials. 2026;19(9):1679. doi:10.3390/ma19091679
BibTeX
@article{Liang2026,
author = {Liang, Enpu and Liang, Xiaodong and Yang, Yong and Yu, Wenchao and Xu, Le and Wang, Maoqiu and Shi, Jie},
title = {Effect of Tempering Temperature on Microstructural Evolution and Mechanical Properties of Cr-Ni-Mo-V Steel for Pressure Vessel Applications},
journal = {Materials},
year = {2026},
volume = {19},
number = {9},
pages = {1679},
doi = {10.3390/ma19091679}
}
EUVIMED