EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Mixing Safety of Composite Solid Propellant Slurry in a Blade-Free Planetary Mixer

Yuncheng Li, Qingjun Wang, Hanyu Chen, Yuanwei Xi, Weibin Tao, Dayong Li, Min Xia iD

Materials · 2026-04-21 · 19 (8) · 1672

DOI: 10.3390/ma19081672 ↗

At a glance

Journal article in Materials, published online on 2026-04-21. Written by Yuncheng Li and 6 co-authors. Institution: School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China. 47 references. The full text is freely available (open access, CC BY 4.0). Funded by: Fundamental Research Funds for the Central Universities of China.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Blade-Free Planetary Mixer (BFPM) can rapidly and efficiently mix highly viscous materials because of the strong centrifugal forces generated by the planetary motion of the mixing vessel. The safety of energetic propellant slurry during BFPM processing is critical. In this work, the mixing performance and process safety of composite solid propellant slurry in a BFPM were investigated through morphology observation, mixing index analysis, temperature measurement, rheological testing, mechanical sensitivity evaluation, and thermal analysis. The results showed that the BFPM achieved safe, efficient, and uniform mixing of the slurry. Under the baseline condition of 1000 rpm, the mixing index reached 95.73% after 24 min, and the slurry temperature increased to only 31.1 °C. The influence of BFPM processing on slurry safety was mainly reflected in the spatial redistribution of energetic solid components and the solid–liquid mixing state. And mechanical sensitivity tended to increase in regions of higher apparent viscosity. Increasing the rotational speed and adopting alternating rotation promoted particle dispersion and reduced local apparent viscosity, but an excessively high rotational speed reduced thermal stability. Overall, 1200 rpm combined with alternating rotation was identified as the most suitable operating condition. This work provides a practical basis for the safe and efficient BFPM processing of energetic propellant slurries.

Subjects

Author keywords

Blade-Free Planetary Mixercomposite solid propellantmechanical sensitivitymixing processsafety

Authors and institutions

  • School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China.
  • Liaoning Qing Yang Chemical Industry Corporation, Liaoyang 111002, China.
  • China North Chemical Research Academy Group Co., Ltd., Beijing 100089, China.
  • Key Laboratory of High Energy Density Materials, Ministry of Education, Beijing Institute of Technology, Beijing 100081, China.

ORCID profiles: Min Xia

Funding

  • Fundamental Research Funds for the Central Universities of China

Cite

APA

Li, Y., Wang, Q., Chen, H., Xi, Y., Tao, W., Li, D., & Xia, M. (2026). Mixing Safety of Composite Solid Propellant Slurry in a Blade-Free Planetary Mixer. Materials, 19(8), 1672. https://doi.org/10.3390/ma19081672

Vancouver

Li Y, Wang Q, Chen H, Xi Y, Tao W, Li D, et al. Mixing Safety of Composite Solid Propellant Slurry in a Blade-Free Planetary Mixer. Materials. 2026;19(8):1672. doi:10.3390/ma19081672

BibTeX
@article{Li2026,
  author = {Li, Yuncheng and Wang, Qingjun and Chen, Hanyu and Xi, Yuanwei and Tao, Weibin and Li, Dayong and Xia, Min},
  title = {Mixing Safety of Composite Solid Propellant Slurry in a Blade-Free Planetary Mixer},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {8},
  pages = {1672},
  doi = {10.3390/ma19081672}
}
Start for free →