EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mixing Safety of Composite Solid Propellant Slurry in a Blade-Free Planetary Mixer

Yuncheng Li, Qingjun Wang, Hanyu Chen, Yuanwei Xi, Weibin Tao, Dayong Li, Min Xia iD

Materials · 21.04.2026 · 19 (8) · 1672

DOI: 10.3390/ma19081672 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 21.04.2026. Verfasst von Yuncheng Li und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundamental Research Funds for the Central Universities of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Blade-Free Planetary Mixer (BFPM) can rapidly and efficiently mix highly viscous materials because of the strong centrifugal forces generated by the planetary motion of the mixing vessel. The safety of energetic propellant slurry during BFPM processing is critical. In this work, the mixing performance and process safety of composite solid propellant slurry in a BFPM were investigated through morphology observation, mixing index analysis, temperature measurement, rheological testing, mechanical sensitivity evaluation, and thermal analysis. The results showed that the BFPM achieved safe, efficient, and uniform mixing of the slurry. Under the baseline condition of 1000 rpm, the mixing index reached 95.73% after 24 min, and the slurry temperature increased to only 31.1 °C. The influence of BFPM processing on slurry safety was mainly reflected in the spatial redistribution of energetic solid components and the solid–liquid mixing state. And mechanical sensitivity tended to increase in regions of higher apparent viscosity. Increasing the rotational speed and adopting alternating rotation promoted particle dispersion and reduced local apparent viscosity, but an excessively high rotational speed reduced thermal stability. Overall, 1200 rpm combined with alternating rotation was identified as the most suitable operating condition. This work provides a practical basis for the safe and efficient BFPM processing of energetic propellant slurries.

Schlagwörter

Stichwörter der Autor:innen

Blade-Free Planetary Mixercomposite solid propellantmechanical sensitivitymixing processsafety

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China.
  • Liaoning Qing Yang Chemical Industry Corporation, Liaoyang 111002, China.
  • China North Chemical Research Academy Group Co., Ltd., Beijing 100089, China.
  • Key Laboratory of High Energy Density Materials, Ministry of Education, Beijing Institute of Technology, Beijing 100081, China.

ORCID-Profile: Min Xia

Förderung

  • Fundamental Research Funds for the Central Universities of China

Zitieren

APA

Li, Y., Wang, Q., Chen, H., Xi, Y., Tao, W., Li, D., & Xia, M. (2026). Mixing Safety of Composite Solid Propellant Slurry in a Blade-Free Planetary Mixer. Materials, 19(8), 1672. https://doi.org/10.3390/ma19081672

Vancouver

Li Y, Wang Q, Chen H, Xi Y, Tao W, Li D, et al. Mixing Safety of Composite Solid Propellant Slurry in a Blade-Free Planetary Mixer. Materials. 2026;19(8):1672. doi:10.3390/ma19081672

BibTeX
@article{Li2026,
  author = {Li, Yuncheng and Wang, Qingjun and Chen, Hanyu and Xi, Yuanwei and Tao, Weibin and Li, Dayong and Xia, Min},
  title = {Mixing Safety of Composite Solid Propellant Slurry in a Blade-Free Planetary Mixer},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {8},
  pages = {1672},
  doi = {10.3390/ma19081672}
}
Kostenlos starten →