EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Evaluating the Effect of Glass and Carbon Fiber Mesh on 3D-Printed Concrete Performance

Emad Janghorban iD, Arpan Joshi, Florindo José Mendes Gaspar iD

Materials · 2026-04-20 · 19 (8) · 1639

DOI: 10.3390/ma19081639 ↗

At a glance

Journal article in Materials, published online on 2026-04-20. Written by Emad Janghorban and 2 co-authors. Institution: Centre for Rapid and Sustainable Product Development (CDRSP), Polytechnic Institute of Leiria, 2430-028 Marinha Grande, Portugal. 28 references. The full text is freely available (open access, CC BY 4.0). Funded by: Fundação para a Ciência e Tecnologia, INOV.AM, Fundação para a Ciência e a Tecnologia.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Additive manufacturing of concrete offers reduced waste, faster construction, and design freedom, yet effective reinforcement integration remains a major challenge due to weak interlayer bonding and anisotropy. Most prior studies focus on vertical reinforcement, short fibers, or metallic systems, achieving modest flexural improvements (15–60%). This study evaluates horizontal continuous reinforcement using glass fiber mesh and two carbon fiber meshes (ARMO-mesh 200/200 and 500/500) integrated during 3D printing. The methods include extrusion-based printing of small (four-layer) and beam-like (eight-layer) specimens, both printed and cast, followed by three-point flexural and compression tests at 7 and 28 days under vertical and horizontal loading. The results show that ARMO-mesh 500/500 significantly enhances flexural strength—up to 100% over unreinforced controls (e.g., 24.4 kNm vs. 12.2 kNm in small specimens at 28 days) and ~60% over ARMO-mesh 200/200, while glass mesh provides only marginal gains (~12%). Carbon meshes also improve post-cracking toughness and apparent interlayer cohesion. A pronounced size effect reduces nominal strength in larger specimens. These findings demonstrate that wide-format porous carbon meshes offer a scalable, corrosion-resistant solution for load-bearing 3D-printed concrete elements, advancing automated digital construction.

Subjects

Author keywords

3D-printed concreteadditive manufacturingcarbon fiber meshconcrete reinforcementflexural strengthglass fiber meshinterlayer bonding

Authors and institutions

  • Centre for Rapid and Sustainable Product Development (CDRSP), Polytechnic Institute of Leiria, 2430-028 Marinha Grande, Portugal.

ORCID profiles: Emad Janghorban, Florindo José Mendes Gaspar

Funding

  • Fundação para a Ciência e Tecnologia
  • INOV.AM
  • Fundação para a Ciência e a Tecnologia

Cite

APA

Janghorban, E., Joshi, A., & Gaspar, F. J. M. (2026). Evaluating the Effect of Glass and Carbon Fiber Mesh on 3D-Printed Concrete Performance. Materials, 19(8), 1639. https://doi.org/10.3390/ma19081639

Vancouver

Janghorban E, Joshi A, Gaspar FJM. Evaluating the Effect of Glass and Carbon Fiber Mesh on 3D-Printed Concrete Performance. Materials. 2026;19(8):1639. doi:10.3390/ma19081639

BibTeX
@article{Janghorban2026,
  author = {Janghorban, Emad and Joshi, Arpan and Gaspar, Florindo José Mendes},
  title = {Evaluating the Effect of Glass and Carbon Fiber Mesh on 3D-Printed Concrete Performance},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {8},
  pages = {1639},
  doi = {10.3390/ma19081639}
}
Start for free →