EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Assessment of HIPIMS-Deposited TiN Nanostructured Thin Films as Hydrogen Permeation Barriers on Carbon Steel

Raúl González-Durán, Alvaro Rodríguez-Prieto iD, Ana María Camacho iD

Materials · 17.04.2026 · 19 (8) · 1623

DOI: 10.3390/ma19081623 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 17.04.2026. Verfasst von Raúl González-Durán und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Manufacturing Engineering, National University of Distance Education UNED, 28040 Madrid, Spain. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidad Nacional de Educación a Distancia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hydrogen embrittlement (HE) represents a critical degradation mechanism in carbon steel components operating in hydrogen-rich environments, such as those encountered in clean energy and petrochemical applications. This study evaluates the hydrogen permeation barrier performance of titanium nitride (TiN) nanostructured thin films deposited by High-Power Impulse Magnetron Sputtering (HiPIMS) on SAE 1020 carbon steel substrates. Electrochemical permeation measurements were performed using the Devanathan–Stachurski dual-cell methodology in accordance with ASTM G148 and ISO 17081 standards. Key hydrogen transport parameters quantified include the effective diffusion coefficient (Deff), lag time (tlag), and steady-state hydrogen oxidation current density. The TiN/carbon steel composite system exhibited tlag = 570 s, Deff = (2.68 ± 0.09) × 10−10 m2 s−1 and a steady-state hydrogen oxidation current density of 21.5 µA cm−2, corresponding to a permeation reduction factor (PRF) of 2.32 and a barrier efficiency of η = 56.9%. The superior barrier performance is attributed to the dense, low-defect microstructure characteristic of HiPIMS deposition. These results validate HiPIMS-deposited TiN as a robust hydrogen diffusion barrier, with the established performance metrics providing quantitative benchmarks for the design of hydrogen-resistant coatings in energy applications.

Schlagwörter

Stichwörter der Autor:innen

PVD coatinghigh power impulse magnetron sputtering (HIPIMS)hydrogen nitride (TiN)hydrogen permeationmaterials performance

Autor:innen und Institutionen

  • Department of Manufacturing Engineering, National University of Distance Education UNED, 28040 Madrid, Spain.

ORCID-Profile: Alvaro Rodríguez-Prieto, Ana María Camacho

Förderung

  • Universidad Nacional de Educación a Distancia

Zitieren

APA

González-Durán, R., Rodríguez-Prieto, A., & Camacho, A. M. (2026). Assessment of HIPIMS-Deposited TiN Nanostructured Thin Films as Hydrogen Permeation Barriers on Carbon Steel. Materials, 19(8), 1623. https://doi.org/10.3390/ma19081623

Vancouver

González-Durán R, Rodríguez-Prieto A, Camacho AM. Assessment of HIPIMS-Deposited TiN Nanostructured Thin Films as Hydrogen Permeation Barriers on Carbon Steel. Materials. 2026;19(8):1623. doi:10.3390/ma19081623

BibTeX
@article{GonzlezDurn2026,
  author = {González-Durán, Raúl and Rodríguez-Prieto, Alvaro and Camacho, Ana María},
  title = {Assessment of HIPIMS-Deposited TiN Nanostructured Thin Films as Hydrogen Permeation Barriers on Carbon Steel},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {8},
  pages = {1623},
  doi = {10.3390/ma19081623}
}
Kostenlos starten →