EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Influence of carbon ionization increment by adding ne on the bonding, electrical, and tribological properties of carbon thin films deposited by HiPIMS

César D Rivera Tello, F J Flores-Ruiz, J Pérez Alvarez, J A Guerrero de León, I Farías, L Flores-Cova, M Flores

Scientific Reports · 27.09.2024 · 14 (1)

DOI: 10.1038/s41598-024-73446-0 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Scientific Reports, online erschienen am 27.09.2024. Verfasst von César D Rivera Tello und 6 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Ingeniería Mecánica Eléctrica, CUCEI, Universidad de Guadalajara, Blvd. Marcelino García Barragán 1421, Olímpica, C.P. 44430, Guadala…. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, we use mass quadrupole spectroscopy to analyze the ion energy distribution function for C+ ions from different gas composition discharges (20, 40, 60, 80, and 90% Ne) + Ar in a plasma sputtering process. Carbon films were obtained for each gas composition discharge. The carbon bonding structure of films was analyzed by Raman spectroscopy using deconvolution fitting of the G and D Raman peaks. The C-sp3 content was correlated with the electrical and tribological properties of the carbon films. Our results further corroborate the enhancement of carbon ionization in HiPIMS processes by adding neon in conventional argon gas during the deposition process. Furthermore, we found that excessive levels of carbon ionization were detrimental in the formation of C-sp3 decreasing the resistivity, and indicating the decrement of the elastic modulus of the samples. In addition, the use of neon in the gas working mixture increased the deposition rate significantly compared to argon-only processes from 1.7 to 3.22 nm/min for the highest deposition rate cases. Tribology showed that an intermediate C-sp3 content in the carbon films developed desirable tribological behaviors with lower friction coefficients and wear rates, revealing that higher values of C-sp3 content are not necessarily for robust solid lubricious and wear resistance.

Schlagwörter

Stichwörter der Autor:innen

C-sp3Carbon-filmHiPIMSIon-energy-distribution-functionPlasma-sputtering

Autor:innen und Institutionen

  • Departamento de Ingeniería Mecánica Eléctrica, CUCEI, Universidad de Guadalajara, Blvd. Marcelino García Barragán 1421, Olímpica, C.P. 44430, Guadalajara, Jalisco, México. cesar.riveratello@academicos.udg.mx.
  • CONAHCYT-Instituto de Física, Benemérita Universidad Autónoma de Puebla, Edificio IF1, Ciudad Universitaria, 72570, Puebla Pue, México.
  • Departamento de Ingeniería de Proyectos, Universidad de Guadalajara, Zapopan, Jalisco, 45150, México.
  • Departamento de Ingeniería Mecánica Eléctrica, CUCEI, Universidad de Guadalajara, Blvd. Marcelino García Barragán 1421, Olímpica, C.P. 44430, Guadalajara, Jalisco, México.

Zitieren

APA

Rivera Tello, C. D., Flores-Ruiz, F. J., Pérez Alvarez, J., Guerrero de León, J. A., Farías, I., Flores-Cova, L., & Flores, M. (2024). Influence of carbon ionization increment by adding ne on the bonding, electrical, and tribological properties of carbon thin films deposited by HiPIMS. Scientific Reports, 14(1). https://doi.org/10.1038/s41598-024-73446-0

Vancouver

Rivera Tello CD, Flores-Ruiz FJ, Pérez Alvarez J, Guerrero de León JA, Farías I, Flores-Cova L, et al. Influence of carbon ionization increment by adding ne on the bonding, electrical, and tribological properties of carbon thin films deposited by HiPIMS. Scientific Reports. 2024;14(1). doi:10.1038/s41598-024-73446-0

BibTeX
@article{RiveraTello2024,
  author = {Rivera Tello, César D and Flores-Ruiz, F J and Pérez Alvarez, J and Guerrero de León, J A and Farías, I and Flores-Cova, L and Flores, M},
  title = {Influence of carbon ionization increment by adding ne on the bonding, electrical, and tribological properties of carbon thin films deposited by HiPIMS},
  journal = {Scientific Reports},
  year = {2024},
  volume = {14},
  number = {1},
  doi = {10.1038/s41598-024-73446-0}
}
Kostenlos starten →