EUVIMEDSkopri EUVIMED
Open access · CC BY 4.0

Research and Optimization of a Digital Model of a Tracked Vehicle Hydraulic Braking System

Zhiqiang Liu, Kun Yang, Cenbo Xiong, Zhiqiang Zeng, Liang Yu iD, Yu Zhou, Songquan Li

Materials · 2026-04-17 · 19 (8) · 1620

DOI: 10.3390/ma19081620 ↗

At a glance

Journal article in Materials, published online on 2026-04-17. Written by Zhiqiang Liu and 6 co-authors. Institution: School of Intelligent Manufacturing Engineering, Shanxi College of Technology, Shuozhou 036000, China. 33 references. The full text is freely available (open access, CC BY 4.0). Funded by: Science and Technology Innovation Program for Higher Education Institutions funded by the Education Department of Shanxi Province.

AstrattSubjectsDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Due to the complex operating environment of tracked vehicles, experimental braking tests using real vehicles are typically costly and time-consuming. Furthermore, limitations in testing environments make it difficult to comprehensively evaluate a system’s braking performance across diverse operating scenarios. To overcome these limitations, this paper proposes the construction of a high-precision digital model to simulate the real braking process of tracked vehicles in a virtual environment and validates the model through experiments. The results show that braking pressure changes continuously and proportionally with the pedal angle, the system response time is less than 0.3 s, braking pressure builds up rapidly, and the output process is smooth, with no significant overshoot. Under different braking percentage conditions, the simulation accuracy of both braking pressure and response time exceeds 95%, indicating that the established model accurately reflects actual braking performance and provides a theoretical basis for optimizing tracked vehicle braking systems. Finally, by rationally designing the parameters of the accumulator and electro-hydraulic proportional valve and reducing the brake cylinder volume, it is possible to improve braking performance. This provides a theoretical basis for the optimization of tracked vehicle braking systems.

Subjects

Author keywords

braking performancedigital modelhydraulic braking systemtracked vehicle

Authors and institutions

  • School of Intelligent Manufacturing Engineering, Shanxi College of Technology, Shuozhou 036000, China.
  • School of Energy and Power Engineering, North University of China, Taiyuan 030051, China.
  • School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China.

ORCID profiles: Liang Yu

Funding

  • Science and Technology Innovation Program for Higher Education Institutions funded by the Education Department of Shanxi Province

Cite

APA

Liu, Z., Yang, K., Xiong, C., Zeng, Z., Yu, L., Zhou, Y., & Li, S. (2026). Research and Optimization of a Digital Model of a Tracked Vehicle Hydraulic Braking System. Materials, 19(8), 1620. https://doi.org/10.3390/ma19081620

Vancouver

Liu Z, Yang K, Xiong C, Zeng Z, Yu L, Zhou Y, et al. Research and Optimization of a Digital Model of a Tracked Vehicle Hydraulic Braking System. Materials. 2026;19(8):1620. doi:10.3390/ma19081620

BibTeX
@article{Liu2026,
  author = {Liu, Zhiqiang and Yang, Kun and Xiong, Cenbo and Zeng, Zhiqiang and Yu, Liang and Zhou, Yu and Li, Songquan},
  title = {Research and Optimization of a Digital Model of a Tracked Vehicle Hydraulic Braking System},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {8},
  pages = {1620},
  doi = {10.3390/ma19081620}
}
Start for free →