EUVIMEDAtrasti EUVIMED
Open access · CC BY 4.0

Design of CoNiCrFeCu-xSc High-Entropy Alloy Fillers for Braze-Welding of WC-Co to Steel

Peiquan Xu iD, Shicheng Sun, Benben Li, Leijun Li iD

Materials · 2026-04-16 · 19 (8) · 1606

DOI: 10.3390/ma19081606 ↗

At a glance

Journal article in Materials, published online on 2026-04-16. Written by Peiquan Xu and 3 co-authors. Institution: Shanghai Collaborative Innovation Center of Laser Advanced Manufacturing Technology, School of Materials Science and Engineering, Shanghai University…. Cited 1 times so far (Crossref); 60 references. The full text is freely available (open access, CC BY 4.0). Funded by: Natural Science Foundation of Shanghai.

SantraukaSubjectsBibliografiniai duomenysCiteRelated studies

Abstract (original language)

Efficient joining of hard metals to steels is crucial for supporting sustainable manufacturing under emissions strategies to minimize CO2. CoNiCrFeCu high-entropy alloy containing scandium (Sc) was designed as a filler for laser braze-welding of WC-Co and steel. The designed compositions with different Sc levels were melted and cast in a high-vacuum non-consumable arc furnace. The results showed that the as-cast microstructure was a complex mixture of a networked Ni2Si, elongated Cr-Fe-Co solid-solution phase, and Fe-Ni-Co-Cu solid-solution phase. Scandium was shown to have formed compounds with nickel/cobalt and copper. The TG-DSC analysis confirmed that the melting points of the designed compositions were between 973.7 °C and 981.5 °C. The maximum spreading area of the CoNiCrFeCu-0.9Sc composition on AISI 1045 steel was 64.83 mm2, and on the WC-Co cermet it was 78.63 mm2. The interface between the fusion zone and AISI 1045 steel exhibited an epitaxial growth of dendrites from the steel base metal. The interface between WC-Co and the fusion zone exhibited a partial penetration of brazing filler into the Co matrix, forming a metallurgical bonding between the dissimilar materials. Sc, as an alloying element in the filler metal, enhanced the bond formation because it decreased the solidus temperature and increased wetting.

Subjects

Author keywords

HRTEMhard metalhigh-entropy alloys (HEAs)scandiumwetting behavior

Authors and institutions

  • Shanghai Collaborative Innovation Center of Laser Advanced Manufacturing Technology, School of Materials Science and Engineering, Shanghai University of Engineering Science, Shanghai 201620, China.
  • State Key Laboratory of Materials for Advanced Nuclear Energy, Shanghai University, Shanghai 200444, China.
  • Department of Chemical and Materials Engineering, University of Alberta, Edmonton, AB T6G 2V4, Canada.

ORCID profiles: Peiquan Xu, Leijun Li

Funding

  • Natural Science Foundation of Shanghai

Cite

APA

Xu, P., Sun, S., Li, B., & Li, L. (2026). Design of CoNiCrFeCu-xSc High-Entropy Alloy Fillers for Braze-Welding of WC-Co to Steel. Materials, 19(8), 1606. https://doi.org/10.3390/ma19081606

Vancouver

Xu P, Sun S, Li B, Li L. Design of CoNiCrFeCu-xSc High-Entropy Alloy Fillers for Braze-Welding of WC-Co to Steel. Materials. 2026;19(8):1606. doi:10.3390/ma19081606

BibTeX
@article{Xu2026,
  author = {Xu, Peiquan and Sun, Shicheng and Li, Benben and Li, Leijun},
  title = {Design of CoNiCrFeCu-xSc High-Entropy Alloy Fillers for Braze-Welding of WC-Co to Steel},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {8},
  pages = {1606},
  doi = {10.3390/ma19081606}
}
Start for free →