EUVIMEDScopri EUVIMED
Open access · CC BY 4.0

Experimental and Numerical Study of Stirrup Fatigue

Abdelwaheb Zeidi iD, Khaled Elleuch iD, Şaban Hakan Atapek, Jaroslaw Konieczny iD, Krzysztof Labisz iD, Janusz Ćwiek iD

Materials · 2026-04-16 · 19 (8) · 1603

DOI: 10.3390/ma19081603 ↗

At a glance

Journal article in Materials, published online on 2026-04-16. Written by Abdelwaheb Zeidi and 5 co-authors. Institution: Laboratoire de Génie des Matériaux et Environnement, Ecole Nationale d'Ingénieurs de Sfax, Sfax University, Route Soukra Km 3.5 B.P., Sfax 1173-3038,…. 30 references. The full text is freely available (open access, CC BY 4.0).

AbstractSubjectsDati bibliograficiCiteRelated studies

Abstract (original language)

Fatigue failure in scaffolding components poses significant risks to worker safety, particularly in high-altitude construction environments. This study investigates the fatigue behavior of scaffolding stirrups, a critical structural element prone to premature failure. The objective is to analyze the fatigue damage mechanisms in stirrups through a combined experimental and numerical approach. Mechanical characterization and micro-hardness testing were conducted to assess the material properties of the stirrup, while finite element modeling (FEM) was employed to simulate its performance under cyclic loading. The Johnson–Cook material model was utilized to compare experimental hysteresis curves with FEM results, validating the numerical approach. Additionally, the Extended Finite Element Method (XFEM) was applied to model crack initiation and propagation. Results reveal that material hardening and fatigue crack growth are the primary causes of stirrup failure, with distinct fatigue zones and crack paths identified. The study quantifies the relationship between crack growth stages and stirrup bending, providing insights into the failure process. These findings contribute to improving the safety and lifespan of scaffolding systems by identifying key factors influencing stirrup durability.

Subjects

Author keywords

S235JRcrack growthfailurefoldingpunching

Authors and institutions

  • Laboratoire de Génie des Matériaux et Environnement, Ecole Nationale d'Ingénieurs de Sfax, Sfax University, Route Soukra Km 3.5 B.P., Sfax 1173-3038, Tunisia.
  • Laboratory of High-Temperature Materials, Department of Metallurgical and Materials Engineering, Faculty of Engineering, Kocaeli University, İzmit 41001, Türkiye.
  • Department of Railway Transport, Faculty of Transport and Aviation Engineering, Silesian University of Technology, 40-019 Katowice, Poland.

ORCID profiles: Abdelwaheb Zeidi, Khaled Elleuch, Jaroslaw Konieczny, Krzysztof Labisz, Janusz Ćwiek

Cite

APA

Zeidi, A., Elleuch, K., Atapek, Ş. H., Konieczny, J., Labisz, K., & Ćwiek, J. (2026). Experimental and Numerical Study of Stirrup Fatigue. Materials, 19(8), 1603. https://doi.org/10.3390/ma19081603

Vancouver

Zeidi A, Elleuch K, Atapek ŞH, Konieczny J, Labisz K, Ćwiek J. Experimental and Numerical Study of Stirrup Fatigue. Materials. 2026;19(8):1603. doi:10.3390/ma19081603

BibTeX
@article{Zeidi2026,
  author = {Zeidi, Abdelwaheb and Elleuch, Khaled and Atapek, Şaban Hakan and Konieczny, Jaroslaw and Labisz, Krzysztof and Ćwiek, Janusz},
  title = {Experimental and Numerical Study of Stirrup Fatigue},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {8},
  pages = {1603},
  doi = {10.3390/ma19081603}
}
Start for free →