EUVIMEDScopri EUVIMED
Open access · CC BY 4.0

Study on the Influence of Precipitation Characteristics on Fatigue Properties of Typical 7xxx Aluminum Alloys

Sirui Tao, Mingyang Yu, Yanan Li, Kai Wen, Xiwu Li iD, Zhihui Li, Yongan Zhang, Baiqing Xiong

Materials · 2026-04-16 · 19 (8) · 1601

DOI: 10.3390/ma19081601 ↗

At a glance

Journal article in Materials, published online on 2026-04-16. Written by Sirui Tao and 7 co-authors. Institution: State Key Laboratory of Nonferrous Structural Materials, China GRINM Group Co., Ltd., Beijing 100088, China. 44 references. The full text is freely available (open access, CC BY 4.0). Funded by: the National Key R&D Program of China, National Key R&D Program of China.

AbstractSubjectsDati bibliograficiCiteRelated studies

Abstract (original language)

The mechanical response of 7xxx aluminum alloys is strongly influenced by both alloy chemistry and the resulting microstructure. In this study, the effect of precipitate characteristics on the fatigue behavior of three 7xxx aluminum alloys with different total amounts of main alloy elements was systematically investigated. Quantitative microstructural characterization was performed under T6 and T74 heat-treatment conditions by combining scanning electron microscopy, transmission electron microscopy, and electron backscatter diffraction. Meanwhile, hardness measurements, room-temperature tensile tests, and fatigue crack growth experiments were carried out to evaluate the mechanical behavior. The results show that, within the present alloy set, the over-aged condition and the alloys with higher overall alloying levels exhibited lower fatigue crack growth rates, which correlated with the coarsening of intragranular precipitates. Such microstructural evolution is suggested to facilitate dislocation motion and thereby reduce fatigue damage associated with dislocation pile-up in the present alloy set. In this work, three typical 7xxx aluminum alloys with different alloying levels were systematically investigated under T6 and T74 conditions. A statistical criterion was established to distinguish GPII zones from η′ precipitates, and a model linking precipitate characteristics to fatigue crack growth behavior was further developed. The present study aims to provide a quantitative framework for understanding and predicting the fatigue behavior of 7xxx aluminum alloys with different total amounts of main alloy elements.

Subjects

Author keywords

7xxx aluminum alloysfatigue crack growth rate prediction modelprecipitation characteristics

Authors and institutions

  • State Key Laboratory of Nonferrous Structural Materials, China GRINM Group Co., Ltd., Beijing 100088, China.
  • GRIMAT Engineering Institute Co., Ltd., Beijing 101407, China.
  • General Research Institute for Nonferrous Metals, Beijing 100088, China.

ORCID profiles: Xiwu Li

Funding

  • the National Key R&D Program of China
  • National Key R&D Program of China

Cite

APA

Tao, S., Yu, M., Li, Y., Wen, K., Li, X., Li, Z., Zhang, Y., & Xiong, B. (2026). Study on the Influence of Precipitation Characteristics on Fatigue Properties of Typical 7xxx Aluminum Alloys. Materials, 19(8), 1601. https://doi.org/10.3390/ma19081601

Vancouver

Tao S, Yu M, Li Y, Wen K, Li X, Li Z, et al. Study on the Influence of Precipitation Characteristics on Fatigue Properties of Typical 7xxx Aluminum Alloys. Materials. 2026;19(8):1601. doi:10.3390/ma19081601

BibTeX
@article{Tao2026,
  author = {Tao, Sirui and Yu, Mingyang and Li, Yanan and Wen, Kai and Li, Xiwu and Li, Zhihui and Zhang, Yongan and Xiong, Baiqing},
  title = {Study on the Influence of Precipitation Characteristics on Fatigue Properties of Typical 7xxx Aluminum Alloys},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {8},
  pages = {1601},
  doi = {10.3390/ma19081601}
}
Start for free →