EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modeling of Fracture Toughness of Degraded HR3C Steel in Relation to Microstructural Changes

Jakub Horváth iD

Materials · 15.04.2026 · 19 (8) · 1581

DOI: 10.3390/ma19081581 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 15.04.2026. Verfasst von Jakub Horváth. Beteiligte Einrichtung: Department of Materials Engineering, Faculty of Mechanical Engineering, Czech Technical University in Prague, Charles Square 13, 12135 Prague, Czech …. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Grant Agency of the Czech Technical University in Prague, Czech Technical University in Prague.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The article documents the cause of a sharp decrease in the fracture toughness of HR3C austenitic steel intended for heat exchange surfaces of supercritical energy blocks during its exposure to elevated temperature. The documentation of the cause of the decrease in fracture toughness is based on a combination of fractographic observation of the fracture surfaces of the tested samples, linked through ongoing precipitation changes in the steel to the fracture toughness of the steel. The result is a description of the decrease in fracture toughness in relation to the Larson–Miller parameter and subsequently the change in fracture toughness in relation to the precipitation changes in HR3C steel. This dependence provides a tool for numerical calculations and simulations of heat exchange surfaces of power plants made of HR3C steel and the simulation of their behavior when cracks are present.

Schlagwörter

Stichwörter der Autor:innen

HR3CM23C6austenitic steelfracture toughnessprecipitation changesultra super critical powerplants (USC)

Autor:innen und Institutionen

  • Department of Materials Engineering, Faculty of Mechanical Engineering, Czech Technical University in Prague, Charles Square 13, 12135 Prague, Czech Republic.

ORCID-Profile: Jakub Horváth

Förderung

  • Grant Agency of the Czech Technical University in Prague
  • Czech Technical University in Prague

Zitieren

APA

Horváth, J. (2026). Modeling of Fracture Toughness of Degraded HR3C Steel in Relation to Microstructural Changes. Materials, 19(8), 1581. https://doi.org/10.3390/ma19081581

Vancouver

Horváth J. Modeling of Fracture Toughness of Degraded HR3C Steel in Relation to Microstructural Changes. Materials. 2026;19(8):1581. doi:10.3390/ma19081581

BibTeX
@article{Horvth2026,
  author = {Horváth, Jakub},
  title = {Modeling of Fracture Toughness of Degraded HR3C Steel in Relation to Microstructural Changes},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {8},
  pages = {1581},
  doi = {10.3390/ma19081581}
}
Kostenlos starten →